android: add port of wg-quick

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This commit is contained in:
Jason A. Donenfeld 2017-07-20 06:07:48 +02:00
parent 077dac0514
commit 91fb17a014
4 changed files with 259 additions and 0 deletions

21
contrib/android/README.md Normal file
View file

@ -0,0 +1,21 @@
# Tools for Android
This currently contains a version of wg-quick.bash that works with
Android 7's `ndc` command. It requires the WireGuard module to be
part of your kernel, but after that, the usual `wg-quick up` and
`wg-quick down` commands work normally.
## Installation
Build a `wg` binary for Android and place it in this folder. Then
copy this folder some place on your phone, and run `sh ./install.sh`
as root. It should survive ROM flashes.
## Usage
Compared to the ordinary wg-quick, this one gains a "DNS =" field,
but loses SaveConfig and {Pre,Post}{Up,Down}.
Put your configuration files into `/data/misc/wireguard/`. After that,
the normal `wg-quick up|down` commands will work.

View file

@ -0,0 +1,37 @@
#!/sbin/sh
. /tmp/backuptool.functions
list_files() {
cat <<_EOF
xbin/wg
xbin/wg-quick
_EOF
}
case "$1" in
backup)
list_files | while read FILE DUMMY; do
backup_file $S/"$FILE"
done
;;
restore)
list_files | while read FILE REPLACEMENT; do
R=""
[ -n "$REPLACEMENT" ] && R="$S/$REPLACEMENT"
[ -f "$C/$S/$FILE" ] && restore_file $S/"$FILE" "$R"
done
;;
pre-backup)
# Stub
;;
post-backup)
# Stub
;;
pre-restore)
# Stub
;;
post-restore)
# Stub
;;
esac

14
contrib/android/install.sh Executable file
View file

@ -0,0 +1,14 @@
#!/bin/sh
mount -o rw,remount /system
cp -v ./addonsd.sh /system/addon.d/40-wireguard.sh
if [ -f ./wg ]; then
cp -v ./wg /system/xbin/wg
else
echo "Warning: this directory does not contain wg. You may have forgotten to compile it yourself?" >&2
fi
cp -v ./wg-quick.bash /system/xbin/wg-quick
chmod 755 /system/xbin/wg /system/xbin/wg-quick /system/addon.d/40-wireguard.sh
mkdir -pvm 700 /data/misc/wireguard
mount -o ro,remount /system

View file

@ -0,0 +1,187 @@
#!/system/xbin/bash
#
# Copyright (C) 2016-2017 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
#
set -e -o pipefail
shopt -s extglob
export LC_ALL=C
SELF="$(readlink -f "${BASH_SOURCE[0]}")"
export PATH="${SELF%/*}:$PATH"
WG_CONFIG=""
INTERFACE=""
NETID=0
ADDRESSES=( )
MTU=""
DNS=""
CONFIG_FILE=""
PROGRAM="${0##*/}"
ARGS=( "$@" )
parse_options() {
local interface_section=0 line key value
CONFIG_FILE="$1"
[[ $CONFIG_FILE =~ ^[a-zA-Z0-9_=+.-]{1,16}$ ]] && CONFIG_FILE="/data/misc/wireguard/$CONFIG_FILE.conf"
[[ -e $CONFIG_FILE ]] || die "\`$CONFIG_FILE' does not exist"
[[ $CONFIG_FILE =~ /?([a-zA-Z0-9_=+.-]{1,16})\.conf$ ]] || die "The config file must be a valid interface name, followed by .conf"
((($(stat -c '%#a' "$CONFIG_FILE") & 0007) == 0)) || echo "Warning: \`$CONFIG_FILE' is world accessible" >&2
INTERFACE="${BASH_REMATCH[1]}"
shopt -s nocasematch
while read -r line || [[ -n $line ]]; do
key="${line%%=*}"; key="${key##*( )}"; key="${key%%*( )}"
value="${line#*=}"; value="${value##*( )}"; value="${value%%*( )}"
[[ $key == "["* ]] && interface_section=0
[[ $key == "[Interface]" ]] && interface_section=1
if [[ $interface_section -eq 1 ]]; then
case "$key" in
Address) ADDRESSES+=( ${value//,/ } ); continue ;;
MTU) MTU="$value"; continue ;;
DNS) DNS="$value"; continue ;;
esac
fi
WG_CONFIG+="$line"$'\n'
done < "$CONFIG_FILE"
shopt -u nocasematch
}
cmd() {
echo "[#] $*" >&2
"$@"
}
cndc() {
local out="$(cmd ndc "$@")"
[[ $out == *200\ 0* ]] || { echo "$out"; return 1; }
}
die() {
echo "$PROGRAM: $*" >&2
exit 1
}
auto_su() {
[[ $UID == 0 ]] || exec su -p -c "'$SELF' ${ARGS[*]}"
}
add_if() {
cmd ip link add "$INTERFACE" type wireguard
}
del_if() {
cmd ip link del "$INTERFACE"
[[ $(ip rule show) =~ 0xc([0-9a-f]+)/0xcffff\ lookup\ $INTERFACE ]] && cndc network destroy $(( 0x${BASH_REMATCH[1]} ));
}
up_if() {
while [[ $NETID -lt 4096 ]]; do
NETID="$RANDOM"
done
cmd wg set "$INTERFACE" fwmark 0x20000
cndc interface setcfg "$INTERFACE" up
cndc network create "$NETID" vpn 1 1
cndc network interface add "$NETID" "$INTERFACE"
cndc network users add "$NETID" 0-99999
}
set_dns() {
cndc resolver setnetdns "$NETID" "" "$1"
}
add_addr() {
if [[ $1 == *:* ]]; then
cndc interface ipv6 "$INTERFACE" enable
cmd ip -6 addr add "$1" dev "$INTERFACE"
else
local ip="${1%%/*}" mask=32
[[ $1 == */* ]] && mask="${1##*/}"
cndc interface setcfg "$INTERFACE" "$ip" "$mask"
fi
}
set_mtu() {
local mtu=0 endpoint output
if [[ -n $MTU ]]; then
cndc interface setmtu "$INTERFACE" "$MTU"
return
fi
while read -r _ endpoint; do
[[ $endpoint =~ ^\[?([a-z0-9:.]+)\]?:[0-9]+$ ]] || continue
output="$(ip route get "${BASH_REMATCH[1]}" || true)"
[[ ( $output =~ mtu\ ([0-9]+) || ( $output =~ dev\ ([^ ]+) && $(ip link show dev "${BASH_REMATCH[1]}") =~ mtu\ ([0-9]+) ) ) && ${BASH_REMATCH[1]} -gt $mtu ]] && mtu="${BASH_REMATCH[1]}"
done < <(wg show "$INTERFACE" endpoints)
if [[ $mtu -eq 0 ]]; then
read -r output < <(ip route show default || true) || true
[[ ( $output =~ mtu\ ([0-9]+) || ( $output =~ dev\ ([^ ]+) && $(ip link show dev "${BASH_REMATCH[1]}") =~ mtu\ ([0-9]+) ) ) && ${BASH_REMATCH[1]} -gt $mtu ]] && mtu="${BASH_REMATCH[1]}"
fi
[[ $mtu -gt 0 ]] || mtu=1500
cndc interface setmtu "$INTERFACE" $(( mtu - 80 ))
}
add_route() {
cndc network route add "$NETID" "$INTERFACE" "$1"
}
set_config() {
cmd wg setconf "$INTERFACE" <(echo "$WG_CONFIG")
}
cmd_usage() {
cat >&2 <<-_EOF
Usage: $PROGRAM [ up | down ] [ CONFIG_FILE | INTERFACE ]
CONFIG_FILE is a configuration file, whose filename is the interface name
followed by \`.conf'. Otherwise, INTERFACE is an interface name, with
configuration found at /data/misc/wireguard/INTERFACE.conf. It is to be readable
by wg(8)'s \`setconf' sub-command, with the exception of the following additions
to the [Interface] section, which are handled by $PROGRAM:
- Address: may be specified one or more times and contains one or more
IP addresses (with an optional CIDR mask) to be set for the interface.
- MTU: an optional MTU for the interface; if unspecified, auto-calculated.
- DNS: an optional DNS server to use while the device is up.
See wg-quick(8) for more info and examples.
_EOF
}
cmd_up() {
local i
[[ -z $(ip link show dev "$INTERFACE" 2>/dev/null) ]] || die "\`$INTERFACE' already exists"
trap 'del_if; exit' INT TERM EXIT
add_if
set_config
set_mtu
for i in "${ADDRESSES[@]}"; do
add_addr "$i"
done
up_if
[[ -z $DNS ]] || set_dns "$DNS"
for i in $(while read -r _ i; do for i in $i; do [[ $i =~ ^[0-9a-z:.]+/[0-9]+$ ]] && echo "$i"; done; done < <(wg show "$INTERFACE" allowed-ips) | sort -nr -k 2 -t /); do
[[ $(ip route get "$i" 2>/dev/null) == *dev\ $INTERFACE\ * ]] || add_route "$i"
done
trap - INT TERM EXIT
}
cmd_down() {
[[ -n $(ip link show dev "$INTERFACE" type wireguard 2>/dev/null) ]] || die "\`$INTERFACE' is not a WireGuard interface"
del_if
}
if [[ $# -eq 1 && ( $1 == --help || $1 == -h || $1 == help ) ]]; then
cmd_usage
elif [[ $# -eq 2 && $1 == up ]]; then
auto_su
parse_options "$2"
cmd_up
elif [[ $# -eq 2 && $1 == down ]]; then
auto_su
parse_options "$2"
cmd_down
else
cmd_usage
exit 1
fi
exit 0