wg-config: use ip rules instead of tungate

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

contrib/wg-config/Makefile

@@ -2,12 +2,10 @@ PREFIX ?= /usr
 DESTDIR ?=
 SBINDIR ?= $(PREFIX)/sbin
 
-SCRIPTS := wg-config tungate
-
 all:
-	@echo "These are shell scripts, so there is nothing to do. Try \"make install\" instead."
+	@echo "This is a shell script, so there is nothing to do. Try \"make install\" instead."
 
 install:
-	@install -v -m0755 -D -t$(DESTDIR)$(SBINDIR) $(SCRIPTS)
+	@install -v -m0755 -D -t$(DESTDIR)$(SBINDIR) wg-config
 
 .PHONY: all install

contrib/wg-config/README

@@ -43,17 +43,9 @@ options described above, and variables that may be declared in ENV_FILE:
 Additionally, ENV_FILE may define the bash functions pre_add, post_add,
 pre_del, and post_del, which will be called at their respective times.
 
+== Basic Example ==
 
-== Helper Tool ==
+This basic example might be used by a server.
-
-tungate is a separate utility, developed originally not explicitly for
-WireGuard, which acts as a poor man's way of ensuring 0/1 and 128/1 default
-route overrides still work with an endpoint going over the original default
-route. It's quite handy, and wg-config makes use of it for dealing with
-0.0.0.0/0 routes. At the moment it only supports IPv4, but adding IPv6
-should be pretty easy.
-
-== Example ==
 
 /etc/wireguard/wg-server.conf:
 
@@ -83,36 +75,11 @@ Run at startup:
 Run at shutdown:
 # wg-config del wgserver0 --env-file=/etc/wireguard/wg-server.env
 
-== Advanced Example ==
-
-/etc/wireguard/wg-vpn-gateway.conf:
-
-	[Interface]
-	PrivateKey = 6JiA3fa+NG+x5m6aq7+lxlVaVqVf1mxK6/pDOZdNuXc=
-
-	[Peer]
-	PublicKey = 6NagfTu+s8+TkEKpxX7pNjJuTf4zYtoJme7iQFYIw0A=
-	AllowedIPs = 0.0.0.0/0
-	Endpoint = demo.wireguard.io:29912
-
-/etc/wireguard/wg-vpn-gateway.env:
-
-	[[ $SUBCOMMAND == add ]] && CONFIG_FILE="$(dirname "${BASH_SOURCE[0]}")/demo-vpn.conf" || true
-	ADDRESSES=( 10.200.100.2/32 )
-	post_add() {
-		printf 'nameserver 10.200.100.1' | cmd resolvconf -a "$INTERFACE" -m 0
-	}
-	post_del() {
-		cmd resolvconf -d "$INTERFACE"
-	}
-
-Run to flip on the VPN:
-# wg-config add wgvpn0 --env-file=/etc/wireguard/wg-vpn-gateway.env
-The config file is not overwritten on shutdown, due to the conditional in the env file:
-# wg-config del wgvpn0 --env-file=/etc/wireguard/wg-vpn-gateway.env
-
 == Single File Advanced Example ==
 
+This type of configuration might be desirable for a personal access gateway
+VPN, connecting to a server like in the example above.
+
 /etc/wireguard/wg-vpn-gateway.env:
 
 	CONFIG_FILE_CONTENTS="
@@ -138,3 +105,36 @@ Run to flip on the VPN:
 # wg-config add wgvpn0 --env-file=/etc/wireguard/wg-vpn-gateway.env
 Run to flip off the VPN:
 # wg-config del wgvpn0 --env-file=/etc/wireguard/wg-vpn-gateway.env
+
+== Advanced Example ==
+
+This achieves the same as the above, but with an external file. It only sets the
+configuration file when the subcommand is add, to prevent it from being overwritten.
+The above is much simpler and probably preferred, but this example shows how powerful
+the tool can be.
+
+/etc/wireguard/wg-vpn-gateway.conf:
+
+	[Interface]
+	PrivateKey = 6JiA3fa+NG+x5m6aq7+lxlVaVqVf1mxK6/pDOZdNuXc=
+
+	[Peer]
+	PublicKey = 6NagfTu+s8+TkEKpxX7pNjJuTf4zYtoJme7iQFYIw0A=
+	AllowedIPs = 0.0.0.0/0
+	Endpoint = demo.wireguard.io:29912
+
+/etc/wireguard/wg-vpn-gateway.env:
+
+	[[ $SUBCOMMAND == add ]] && CONFIG_FILE="$(dirname "${BASH_SOURCE[0]}")/demo-vpn.conf" || true
+	ADDRESSES=( 10.200.100.2/32 )
+	post_add() {
+		printf 'nameserver 10.200.100.1' | cmd resolvconf -a "$INTERFACE" -m 0
+	}
+	post_del() {
+		cmd resolvconf -d "$INTERFACE"
+	}
+
+Run to flip on the VPN:
+# wg-config add wgvpn0 --env-file=/etc/wireguard/wg-vpn-gateway.env
+The config file is not overwritten on shutdown, due to the conditional in the env file:
+# wg-config del wgvpn0 --env-file=/etc/wireguard/wg-vpn-gateway.env

contrib/wg-config/tungate

@@ -1,43 +0,0 @@
-#!/bin/bash
-
-unwind() {
-	ip route del "$1/32" 2>/dev/null
-	exit
-}
-
-short_route() {
-	ip route | sed -n "s/$1 \\(.* dev [^ ]\\+\\).*/\\1/p" | head -n 1
-}
-
-resolve_ip() {
-	local filter='/^[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}$/{p;q;}'
-	[[ $(sed -n "$filter" <<<"$1") == "$1" ]] && echo "$1" ||
-		host -t a "$1" | cut -d ' ' -f 4 | sed -n "$filter"
-}
-
-set_route() {
-	local default_route="$(short_route default)"
-	[[ -n $default_route ]] || { echo "[-] Could not determine default route"; return; }
-	echo "[+] Adding route for $1 to be $default_route"
-	ip route del "$1/32" 2>/dev/null
-	ip route add "$1/32" $default_route
-}
-
-check_loop() {
-	local ip="$(resolve_ip "$1")"
-	[[ -n $ip ]] || { echo "[-] Could not determine IP of '$1'" && return 1; }
-	echo "[+] Making sure $ip goes over the default (non-0/1,128/1) route"
-
-	set_route "$ip"
-	trap unwind INT TERM EXIT
-
-	while read -r; do
-		[[ $(short_route "$ip") != "$(short_route default)" ]] && set_route "$ip"
-	done < <(exec ip monitor route)
-}
-
-[[ $# -ne 1 ]] && { echo "Usage: $0 IP|HOST" >&2; exit 1; }
-[[ $UID -ne 0 ]] && exec sudo "$(readlink -f "$0")" "$@"
-
-check_loop "$1"
-exit $?

contrib/wg-config/wg-config

@@ -15,7 +15,7 @@ auto_su() {
 
 unwind() {
 	set +e
-	[[ -n $INTERFACE && -n $(ip link show dev "$INTERFACE" type wireguard 2>/dev/null) ]] && cmd ip link delete dev "$INTERFACE"
+	[[ -n $INTERFACE && -n $(ip link show dev "$INTERFACE" type wireguard 2>/dev/null) ]] && del_if
 	exit
 }
 
@@ -26,6 +26,9 @@ add_if() {
 
 del_if() {
 	[[ -n $(ip link show dev "$INTERFACE" type wireguard 2>/dev/null) ]] || { echo "$PROGRAM: \`$INTERFACE' is not a WireGuard interface" >&2; exit 1; }
+	if [[ $(ip route show table all) =~ .*\ dev\ $INTERFACE\ table\ ([0-9]+)\ .* ]]; then
+		cmd ip rule delete table ${BASH_REMATCH[1]}
+	fi
 	cmd ip link delete dev "$INTERFACE"
 }
 
@@ -38,23 +41,20 @@ add_addr() {
 }
 
 add_route() {
+	if [[ $1 == 0.0.0.0/0 || $1 == ::/0 ]]; then
+		add_default "$1"
+	else
 		cmd ip route add "$1" dev "$INTERFACE"
+	fi
 }
 
 add_default() {
-	if [[ $1 == ::/0 ]]; then
+	[[ $(join <(wg show "$INTERFACE" allowed-ips) <(wg show "$INTERFACE" endpoints)) =~ .*\ ${1//./\\.}\ ([0-9.:a-f]+):[0-9]+$ ]] && local endpoint="${BASH_REMATCH[1]}"
-		echo "tungate: does not yet support IPv6, skipping ::/0" >&2
+	[[ -n $endpoint ]] || return 0
-		return 0
+	local table=51820
-	elif [[ $1 == 0.0.0.0/0 ]]; then
+	while [[ -n $(ip route show table $table) ]]; do ((table++)); done
-		local endpoint="$(join <(wg show "$INTERFACE" allowed-ips) <(wg show "$INTERFACE" endpoints) | sed -n 's/.* 0\.0\.0\.0\/0.* \([0-9.:\/a-z]\+\):[0-9]\+$/\1/p')"
+	cmd ip route add "$1" dev "$INTERFACE" table $table
-		add_route 0/1
+	cmd ip rule add not to "$endpoint" table $table
-		add_route 128/1
-		killall tungate 2>/dev/null || true
-		echo "[&] Forking \`tungate' for $endpoint to background" >&2
-		tungate "$endpoint" >/dev/null 2>&1 & disown
-		return 0
-	fi
-	return 1
 }
 
 set_config() {
@@ -130,16 +130,12 @@ cmd_add() {
 	done
 	up_if
 	if [[ $AUTO_ROUTE -eq 1 ]]; then
-		for i in $(wg show "$INTERFACE" allowed-ips | grep -Po '(?<=[\t ])[0-9.:/a-z]+' | sort -nr -k 2 -t /); do
+		for i in $(wg show "$INTERFACE" allowed-ips | grep -Po '(?<=[\t ])[0-9.:/a-f]+' | sort -nr -k 2 -t /); do
-			if ! add_default "$i" && [[ $(ip route get "$i") != *dev\ $INTERFACE\ * ]]; then
+			[[ $(ip route get "$i" 2>/dev/null) == *dev\ $INTERFACE\ * ]] || add_route "$i"
-				add_route "$i"
-			fi
 		done
 	fi
 	for i in "${ADDITIONAL_ROUTES[@]}"; do
-		if ! add_default "$i"; then
 		add_route "$i"
-		fi
 	done
 	[[ $(type -t post_add) != function ]] || post_add
 	trap - INT TERM EXIT
@@ -148,7 +144,6 @@ cmd_add() {
 cmd_del() {
 	auto_su
 	[[ $(type -t pre_del) != function ]] || pre_del
-	killall tungate 2>/dev/null || true
 	[[ -n $CONFIG_FILE ]] && save_config
 	del_if
         [[ $(type -t post_del) != function ]] || post_del