Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2007 July 14 2.2rc1
Major changes to command line handling and to the way we use
libdockapp, courtesy of Patrice Dumas. This should hopefully fix
several long-standing bugs with non-wmaker window managers (in
particular Debian bugs #280495 and 293546).
Updated to support newer kernels that no longer support
/proc/acpi/info - thanks to Samuel Ortiz.
Fixed a longstanding issue with redrawing - thanks to Vito
Caputo.
This version changes a number of command line options (little used
ones, but they're still incompatible changes) due to the
libdockapp work. In particular, -w becomes -x, -v becomes -V (and
takes an argument rather than being repeated), and -V becomes -v
(thanks to libdockapp grabbing -h, -v and -w for itself). Also,
long options are now supported for everything in wmacpi (but not
acpi, since it doesn't use libdockapp for command line parsing).
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2007 January 10 2.2a1
Added a patch from Patrice Dumas to support newer versions of
libdockapp.
Updated email address in AUTHORS and manpages.
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2005 Jan 5 2.1rc1
Typo fix in the manpage.
Ported to libdockapp-0.5.0 - all this needed was changing the
type of the dockapp width and height to unsigned short.
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2004 September 28 2.0rc1
Added support for switching to capacity mode automatically, on
detecting dodgy reports from the battery.
Added support for capacity mode on charging, with automatic
enabling as per discharging.
Various cleanups.
Hopefully last release before the final 2.0.
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2004 August 18 1.99r7
Implemented the libdockapp port - this seems to close Debian bug
#227819, but it hasn't received sufficient testing.
Implemented a capacity mode for calculating time remaining (as
opposed to the normal current rate mode) - this mode samples the
remaining capacity of the battery and notes the time at which it
was sampled, and uses a history of samples to estimate the rate of
drain on the battery. From there it calculates a value for time
remaining.
Also, various cleanups have gone in:
* a reworking of the scrolling code
* generic battery number support (rather than just
using two pixmaps, one for b1 and one for b2)
* stopped the battery glyph from blinking when running on AC
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2004 July 19 1.99r6
Fix for Debian bug #250792 - the parser for the acpi files was
too stupid to deal with error conditions. I've now added some
basic checking to make it handle the error that caused the bug
report, but I'll need to add more later.
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2004 April 23 1.99r5
Collected fixes for the collected fixes below . . .
* Manpage fixes, to reflect the reality of the current code.
* Code cleanups, to make a few things more sensible. Most notably,
the interface for setting the samplerate has changed so that it's
no longer inverted and illogical - you now say how many times you
want to sample per minute.
* Fixed an issue with initialisation - I'd moved the power_init()
call below the options parsing code, without dealing with the -m
option properly. The end result was that if you told it to monitor
a battery number, it would fail saying the battery didn't exist. I
moved the check for this out of the options parsing and after the
power_init() call.
* Fixed a leaking file descriptor in init_ac_adapters.
* Implemented a way to handle changing batteries - reinitialise
the battery info periodically. I don't know of a better way to do
that, since we'd have to do all that parsing anyway to find out if
it had changed . . .
libdockapp is waiting, but I think that's the only change left
without more bug repots . . .
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2004 April 15 1.99r4
Collected fixes for various small issues.
* Fixed a problem with placement of the window when using the
click to place mode - turned out to be a sizehints problem.
* Some fixes to the manpage.
* Reenabled the CLI build by default - the Debian patches can
handle disabling it themselves.
* Added a way to disable the scrolling message, since some users
find this annoying.
I've left the big changes that are needed (like using libdockapp,
in the hope that it'll solve the docking problems) until later, so
that I can get these smaller fixes out. Hopefully soon . . .
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2003 November 23 1.99
Finally claimed the wmacpi name as my own . . .
Renamed wmacpi-ng and acpi-ng, renamed the header files, fixed up
the makefile.
For the Debian package, also made compilation of the command line
tool optional, defaulting to not building it. This is because
after the renaming, my acpi clashes with the acpi package that's
already in Debian. The command line functionality is now
accessible via the -w option to wmacpi.
This is wmacpi 1.99, so that I can have a release packaged and in
Debian before going to 2.0, so that any bugs that are left can be
found by all the extra users.
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2003 September 26 0.99
Fix the last of the old wmacpi code oddities (specifically, the
APMInfo struct, which was a completely inappropriate name given we
no longer deal with APM, and because of the various code
refactoring).
I think this is probably as good as I can make it without getting
more feedback and the like, so I'm going to make this version
0.99, preliminary to either wmacpi-ng 1.0 or wmacpi 2.0 (depending
which direction I go with that).
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2003 September 23 0.92
Fix a few more bugs, and include an option to allow the user to
specify how often to sample the ACPI data - some BIOSes disable
all interrupts while reading from the battery, which apparently
causes some interactivity issues. I have no idea why reading once
every three seconds (which is our default), but there've been some
complaints.
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2003 July 16 0.90
Make the time display show '--:--' instead of '00:00' when the
time remaining is 0 - I think this is reasonable, since it'll only
get into this state when the present rate value is 0. This only
happens when the battery is fully charged and neither discharging
or charging, or when the battery is completely drained. In any of
these states the time remaining is of very little interest, so we
don't lose anything. We also get to handle the (sadly, very
common) case where the ACPI subsystem doesn't report sane values
for the things we depend on.
Source obtained from http://sourceforge.net/projects/wmacpi/files/.
2003 July 6 0.50
Finally got rid of that annoying button - that space now contains
a 'B 1' or 'B 2' (only those two at present, since I'm too lazy to
fix it so that the number is generic. It should work fine for
anyone who doesn't have a freakish system with more than two
batteries . . .)
A few more code cleanups.
This script is run in the root directory of the dockapps repo to generate the
file used by the Window Maker website to store all of the information in the
dockapps section. Note that this file will then be submitted to the whome repo.
Previously, wmmixer-alsa existed as an object in the repository named
wmmixer-alsa-0.6. However, it was not a directory and contained no files.
This patch removes this object and adds the source to wmmixer-alsa. It was
obtained by extracting wmmixer-alsa-0.6.tar.gz from the source rpm found at
http://ftp.cc.uoc.gr/mirrors/linux/pld/pool/w/wmmixer-alsa/.
The names for channels provided by <sys/soundcard.h> have a padding with
space when their name is shorter than 6 characters, and this cause
excluding them difficult.
The new comparison code makes sure this padding is properly handled during
the match search.
Took the opportunity to bring light changes to try to improve the
readability of the channel listing code.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
Because that's the kind of option that could deserve to be saved in the
file. A device specified on the command line will take precedence; the
list of channel to exclude will be merged.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
There may be some case where user would like to fall back to the original
behaviour, for example if grabbing these keys could get in conflict with
other applications.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
If another application has already set a grab on these keys then the call
would fail (BadAccess) and wmix stop. With the X error handler, we can
display a warning to user and continue anyway.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
We can handle the keys AudioRaiseVolume, AudioLowerVolume and AudioMute,
so we ask the X server to send the key press event for them to us and
update the volume appropriately.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
A number of configuration options are useful only during the startup, so it
is possible to free them when ready.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
It is generally not considered a good behaviour to leave user puzzled on
non-working request. With a little message at least he will know where to
look at.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
Conflicts:
wmix/config.c
The original parser would not say anything if the user had misspelled
something in the file which can be annoying. Now the parser will report
warnings for everything not understood with a message trying to be more
helpful to debug and fix.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
The original code did not abort when an invalid option was provided
or if there was non-options arguments on the command line.
The new code will report all problems found and stop to have the user
fix his command. It also remove some unnecessary pointer checks.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
If the config file was set by user with '-f', it would be a good idea to
report him if we're not able to load it.
Took opportunity to report to user that the config file is loaded if he
asked for verbose operations, so he can see if the default file loaded
is the one he expected.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
Took opportunity to re-order them alphabetically so they are easier to
work with, both for devs and for users.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
Management of the configuration is split in many places, the goal is to
regroup stuff together, starting with the loading from file stuff.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
The PID file was created at the early beginning, but wmix can abort later
if something is not ok. It is better to create it at the end, so it will
be created only if wmix will actually be running.
Took the opportunity to move the code to a dedicated function to keep main
simple, and added a check to fix possible crash on startup if environment
variable $HOME does not exist.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
The bitmap mask associated to the Led image on the knob was not used,
probably because the visual gain is negligible compared to the added
complexity to handle it.
So, as compiler warned about it, remove the variable.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
The original code merely assumed that an XOpenDisplay failure was caused
only by incapacity to connect to the X server, but if $DISPLAY was not set
then the fprintf would be given a NULL pointer which it may not appreciate
(depending on the libc in use).
Let's avoid that case and try to provide more info to help the user.
Signed-off-by: Christophe CURIS <christophe.curis@free.fr>
