curl-w32/docs/libcurl/libcurl-tutorial.md

---
c: Copyright (C) Daniel Stenberg, <daniel.se>, et al.
SPDX-License-Identifier: curl
Title: libcurl-tutorial
Section: 3
Source: libcurl
See-also:
  - libcurl-easy (3)
  - libcurl-errors (3)
  - libcurl-multi (3)
  - libcurl-url (3)
---

# NAME

libcurl-tutorial - libcurl programming tutorial

# Objective

This document attempts to describe the general principles and some basic
approaches to consider when programming with libcurl. The text focuses on the
C interface but should apply fairly well on other language bindings as well as
they usually follow the C API pretty closely.

This document refers to 'the user' as the person writing the source code that
uses libcurl. That would probably be you or someone in your position. What is
generally referred to as 'the program' is the collected source code that you
write that is using libcurl for transfers. The program is outside libcurl and
libcurl is outside of the program.

To get more details on all options and functions described herein, please
refer to their respective man pages.

# Building

There are many different ways to build C programs. This chapter assumes a Unix
style build process. If you use a different build system, you can still read
this to get general information that may apply to your environment as well.

## Compiling the Program

Your compiler needs to know where the libcurl headers are located. Therefore
you must set your compiler's include path to point to the directory where you
installed them. The 'curl-config'[3] tool can be used to get this information:
~~~c
  $ curl-config --cflags
~~~

## Linking the Program with libcurl

When having compiled the program, you need to link your object files to create
a single executable. For that to succeed, you need to link with libcurl and
possibly also with other libraries that libcurl itself depends on. Like the
OpenSSL libraries, but even some standard OS libraries may be needed on the
command line. To figure out which flags to use, once again the 'curl-config'
tool comes to the rescue:
~~~c
  $ curl-config --libs
~~~

## SSL or Not

libcurl can be built and customized in many ways. One of the things that
varies from different libraries and builds is the support for SSL-based
transfers, like HTTPS and FTPS. If a supported SSL library was detected
properly at build-time, libcurl is built with SSL support. To figure out if an
installed libcurl has been built with SSL support enabled, use *curl-config*
like this:

~~~c
  $ curl-config --feature
~~~

If SSL is supported, the keyword *SSL* is written to stdout, possibly together
with a other features that could be either on or off on for different
libcurls.

See also the "Features libcurl Provides" further down.

## autoconf macro

When you write your configure script to detect libcurl and setup variables
accordingly, we offer a macro that probably does everything you need in this
area. See docs/libcurl/libcurl.m4 file - it includes docs on how to use it.

# Portable Code in a Portable World

The people behind libcurl have put a considerable effort to make libcurl work
on a large amount of different operating systems and environments.

You program libcurl the same way on all platforms that libcurl runs on. There
are only a few minor details that differ. If you just make sure to write your
code portable enough, you can create a portable program. libcurl should not
stop you from that.

# Global Preparation

The program must initialize some of the libcurl functionality globally. That
means it should be done exactly once, no matter how many times you intend to
use the library. Once for your program's entire life time. This is done using
~~~c
 curl_global_init()
~~~
and it takes one parameter which is a bit pattern that tells libcurl what to
initialize. Using *CURL_GLOBAL_ALL* makes it initialize all known internal
sub modules, and might be a good default option. The current two bits that are
specified are:

## CURL_GLOBAL_WIN32

which only does anything on Windows machines. When used on a Windows machine,
it makes libcurl initialize the win32 socket stuff. Without having that
initialized properly, your program cannot use sockets properly. You should
only do this once for each application, so if your program already does this
or of another library in use does it, you should not tell libcurl to do this
as well.

## CURL_GLOBAL_SSL

which only does anything on libcurls compiled and built SSL-enabled. On these
systems, this makes libcurl initialize the SSL library properly for this
application. This only needs to be done once for each application so if your
program or another library already does this, this bit should not be needed.

libcurl has a default protection mechanism that detects if
curl_global_init(3) has not been called by the time
curl_easy_perform(3) is called and if that is the case, libcurl runs the
function itself with a guessed bit pattern. Please note that depending solely
on this is not considered nice nor good.

When the program no longer uses libcurl, it should call
curl_global_cleanup(3), which is the opposite of the init call. It
performs the reversed operations to cleanup the resources the
curl_global_init(3) call initialized.

Repeated calls to curl_global_init(3) and curl_global_cleanup(3)
should be avoided. They should only be called once each.

# Features libcurl Provides

It is considered best-practice to determine libcurl features at runtime rather
than at build-time (if possible of course). By calling
curl_version_info(3) and checking out the details of the returned
struct, your program can figure out exactly what the currently running libcurl
supports.

# Two Interfaces

libcurl first introduced the so called easy interface. All operations in the
easy interface are prefixed with 'curl_easy'. The easy interface lets you do
single transfers with a synchronous and blocking function call.

libcurl also offers another interface that allows multiple simultaneous
transfers in a single thread, the so called multi interface. More about that
interface is detailed in a separate chapter further down. You still need to
understand the easy interface first, so please continue reading for better
understanding.

# Handle the Easy libcurl

To use the easy interface, you must first create yourself an easy handle. You
need one handle for each easy session you want to perform. Basically, you
should use one handle for every thread you plan to use for transferring. You
must never share the same handle in multiple threads.

Get an easy handle with
~~~c
 handle = curl_easy_init();
~~~
It returns an easy handle. Using that you proceed to the next step: setting
up your preferred actions. A handle is just a logic entity for the upcoming
transfer or series of transfers.

You set properties and options for this handle using
curl_easy_setopt(3). They control how the subsequent transfer or
transfers using this handle are made. Options remain set in the handle until
set again to something different. They are sticky. Multiple requests using the
same handle use the same options.

If you at any point would like to blank all previously set options for a
single easy handle, you can call curl_easy_reset(3) and you can also
make a clone of an easy handle (with all its set options) using
curl_easy_duphandle(3).

Many of the options you set in libcurl are "strings", pointers to data
terminated with a zero byte. When you set strings with
curl_easy_setopt(3), libcurl makes its own copy so that they do not need
to be kept around in your application after being set[4].

One of the most basic properties to set in the handle is the URL. You set your
preferred URL to transfer with CURLOPT_URL(3) in a manner similar to:

~~~c
 curl_easy_setopt(handle, CURLOPT_URL, "http://domain.com/");
~~~

Let's assume for a while that you want to receive data as the URL identifies a
remote resource you want to get here. Since you write a sort of application
that needs this transfer, I assume that you would like to get the data passed
to you directly instead of simply getting it passed to stdout. So, you write
your own function that matches this prototype:
~~~c
 size_t write_data(void *buffer, size_t size, size_t nmemb, void *userp);
~~~
You tell libcurl to pass all data to this function by issuing a function
similar to this:
~~~c
 curl_easy_setopt(handle, CURLOPT_WRITEFUNCTION, write_data);
~~~
You can control what data your callback function gets in the fourth argument
by setting another property:
~~~c
 curl_easy_setopt(handle, CURLOPT_WRITEDATA, &internal_struct);
~~~
Using that property, you can easily pass local data between your application
and the function that gets invoked by libcurl. libcurl itself does not touch
the data you pass with CURLOPT_WRITEDATA(3).

libcurl offers its own default internal callback that takes care of the data
if you do not set the callback with CURLOPT_WRITEFUNCTION(3). It simply
outputs the received data to stdout. You can have the default callback write
the data to a different file handle by passing a 'FILE *' to a file opened for
writing with the CURLOPT_WRITEDATA(3) option.

Now, we need to take a step back and take a deep breath. Here is one of those
rare platform-dependent nitpicks. Did you spot it? On some platforms[2],
libcurl is not able to operate on file handles opened by the
program. Therefore, if you use the default callback and pass in an open file
handle with CURLOPT_WRITEDATA(3), libcurl crashes. You should avoid this
to make your program run fine virtually everywhere.

(CURLOPT_WRITEDATA(3) was formerly known as *CURLOPT_FILE*. Both names still
work and do the same thing).

If you are using libcurl as a win32 DLL, you MUST use the
CURLOPT_WRITEFUNCTION(3) if you set CURLOPT_WRITEDATA(3) - or experience
crashes.

There are of course many more options you can set, and we get back to a few of
them later. Let's instead continue to the actual transfer:

~~~c
 success = curl_easy_perform(handle);
~~~

curl_easy_perform(3) connects to the remote site, does the necessary commands
and performs the transfer. Whenever it receives data, it calls the callback
function we previously set. The function may get one byte at a time, or it may
get many kilobytes at once. libcurl delivers as much as possible as often as
possible. Your callback function should return the number of bytes it "took
care of". If that is not the same amount of bytes that was passed to it,
libcurl aborts the operation and returns with an error code.

When the transfer is complete, the function returns a return code that informs
you if it succeeded in its mission or not. If a return code is not enough for
you, you can use the CURLOPT_ERRORBUFFER(3) to point libcurl to a buffer of
yours where it stores a human readable error message as well.

If you then want to transfer another file, the handle is ready to be used
again. It is even preferred and encouraged that you reuse an existing handle
if you intend to make another transfer. libcurl then attempts to reuse a
previous connection.

For some protocols, downloading a file can involve a complicated process of
logging in, setting the transfer mode, changing the current directory and
finally transferring the file data. libcurl takes care of all that
complication for you. Given simply the URL to a file, libcurl takes care of
all the details needed to get the file moved from one machine to another.

# Multi-threading Issues

libcurl is thread safe but there are a few exceptions. Refer to
libcurl-thread(3) for more information.

# When It does not Work

There are times when the transfer fails for some reason. You might have set
the wrong libcurl option or misunderstood what the libcurl option actually
does, or the remote server might return non-standard replies that confuse the
library which then confuses your program.

There is one golden rule when these things occur: set the
CURLOPT_VERBOSE(3) option to 1. it causes the library to spew out the
entire protocol details it sends, some internal info and some received
protocol data as well (especially when using FTP). If you are using HTTP,
adding the headers in the received output to study is also a clever way to get
a better understanding why the server behaves the way it does. Include headers
in the normal body output with CURLOPT_HEADER(3) set 1.

Of course, there are bugs left. We need to know about them to be able to fix
them, so we are quite dependent on your bug reports. When you do report
suspected bugs in libcurl, please include as many details as you possibly can:
a protocol dump that CURLOPT_VERBOSE(3) produces, library version, as
much as possible of your code that uses libcurl, operating system name and
version, compiler name and version etc.

If CURLOPT_VERBOSE(3) is not enough, you increase the level of debug
data your application receive by using the CURLOPT_DEBUGFUNCTION(3).

Getting some in-depth knowledge about the protocols involved is never wrong,
and if you are trying to do funny things, you might understand libcurl and how
to use it better if you study the appropriate RFC documents at least briefly.

# Upload Data to a Remote Site

libcurl tries to keep a protocol independent approach to most transfers, thus
uploading to a remote FTP site is similar to uploading data to an HTTP server
with a PUT request.

Of course, first you either create an easy handle or you reuse one existing
one. Then you set the URL to operate on just like before. This is the remote
URL, that we now upload.

Since we write an application, we most likely want libcurl to get the upload
data by asking us for it. To make it do that, we set the read callback and the
custom pointer libcurl passes to our read callback. The read callback should
have a prototype similar to:
~~~c
 size_t function(char *bufptr, size_t size, size_t nitems, void *userp);
~~~
Where *bufptr* is the pointer to a buffer we fill in with data to upload
and *size*nitems* is the size of the buffer and therefore also the maximum
amount of data we can return to libcurl in this call. The *userp* pointer
is the custom pointer we set to point to a struct of ours to pass private data
between the application and the callback.
~~~c
 curl_easy_setopt(handle, CURLOPT_READFUNCTION, read_function);

 curl_easy_setopt(handle, CURLOPT_READDATA, &filedata);
~~~
Tell libcurl that we want to upload:
~~~c
 curl_easy_setopt(handle, CURLOPT_UPLOAD, 1L);
~~~
A few protocols do not behave properly when uploads are done without any prior
knowledge of the expected file size. So, set the upload file size using the
CURLOPT_INFILESIZE_LARGE(3) for all known file sizes like this[1]:

~~~c
 /* in this example, file_size must be an curl_off_t variable */
 curl_easy_setopt(handle, CURLOPT_INFILESIZE_LARGE, file_size);
~~~

When you call curl_easy_perform(3) this time, it performs all the
necessary operations and when it has invoked the upload it calls your supplied
callback to get the data to upload. The program should return as much data as
possible in every invoke, as that is likely to make the upload perform as fast
as possible. The callback should return the number of bytes it wrote in the
buffer. Returning 0 signals the end of the upload.

# Passwords

Many protocols use or even require that user name and password are provided
to be able to download or upload the data of your choice. libcurl offers
several ways to specify them.

Most protocols support that you specify the name and password in the URL
itself. libcurl detects this and use them accordingly. This is written like
this:
~~~c
 protocol://user:password@example.com/path/
~~~
If you need any odd letters in your user name or password, you should enter
them URL encoded, as %XX where XX is a two-digit hexadecimal number.

libcurl also provides options to set various passwords. The user name and
password as shown embedded in the URL can instead get set with the
CURLOPT_USERPWD(3) option. The argument passed to libcurl should be a
char * to a string in the format "user:password". In a manner like this:

~~~c
 curl_easy_setopt(handle, CURLOPT_USERPWD, "myname:thesecret");
~~~

Another case where name and password might be needed at times, is for those
users who need to authenticate themselves to a proxy they use. libcurl offers
another option for this, the CURLOPT_PROXYUSERPWD(3). It is used quite similar
to the CURLOPT_USERPWD(3) option like this:

~~~c
 curl_easy_setopt(handle, CURLOPT_PROXYUSERPWD, "myname:thesecret");
~~~

There is a long time Unix "standard" way of storing FTP user names and
passwords, namely in the $HOME/.netrc file (on Windows, libcurl also checks
the *%USERPROFILE% environment* variable if *%HOME%* is unset, and tries
"_netrc" as name). The file should be made private so that only the user may
read it (see also the "Security Considerations" chapter), as it might contain
the password in plain text. libcurl has the ability to use this file to figure
out what set of user name and password to use for a particular host. As an
extension to the normal functionality, libcurl also supports this file for
non-FTP protocols such as HTTP. To make curl use this file, use the
CURLOPT_NETRC(3) option:

~~~c
 curl_easy_setopt(handle, CURLOPT_NETRC, 1L);
~~~

A basic example of how such a .netrc file may look like:

~~~c
 machine myhost.mydomain.com
 login userlogin
 password secretword
~~~

All these examples have been cases where the password has been optional, or
at least you could leave it out and have libcurl attempt to do its job
without it. There are times when the password is not optional, like when
you are using an SSL private key for secure transfers.

To pass the known private key password to libcurl:
~~~c
 curl_easy_setopt(handle, CURLOPT_KEYPASSWD, "keypassword");
~~~

# HTTP Authentication

The previous chapter showed how to set user name and password for getting URLs
that require authentication. When using the HTTP protocol, there are many
different ways a client can provide those credentials to the server and you
can control which way libcurl uses them. The default HTTP authentication
method is called 'Basic', which is sending the name and password in clear-text
in the HTTP request, base64-encoded. This is insecure.

At the time of this writing, libcurl can be built to use: Basic, Digest, NTLM,
Negotiate (SPNEGO). You can tell libcurl which one to use with
CURLOPT_HTTPAUTH(3) as in:

~~~c
 curl_easy_setopt(handle, CURLOPT_HTTPAUTH, CURLAUTH_DIGEST);

~~~

When you send authentication to a proxy, you can also set authentication type
the same way but instead with CURLOPT_PROXYAUTH(3):

~~~c
 curl_easy_setopt(handle, CURLOPT_PROXYAUTH, CURLAUTH_NTLM);
~~~

Both these options allow you to set multiple types (by ORing them together),
to make libcurl pick the most secure one out of the types the server/proxy
claims to support. This method does however add a round-trip since libcurl
must first ask the server what it supports:

~~~c
 curl_easy_setopt(handle, CURLOPT_HTTPAUTH, CURLAUTH_DIGEST|CURLAUTH_BASIC);
~~~

For convenience, you can use the *CURLAUTH_ANY* define (instead of a list with
specific types) which allows libcurl to use whatever method it wants.

When asking for multiple types, libcurl picks the available one it considers
"best" in its own internal order of preference.

# HTTP POSTing

We get many questions regarding how to issue HTTP POSTs with libcurl the
proper way. This chapter thus includes examples using both different versions
of HTTP POST that libcurl supports.

The first version is the simple POST, the most common version, that most HTML
pages using the <form> tag uses. We provide a pointer to the data and tell
libcurl to post it all to the remote site:

~~~c
    char *data="name=daniel&project=curl";
    curl_easy_setopt(handle, CURLOPT_POSTFIELDS, data);
    curl_easy_setopt(handle, CURLOPT_URL, "http://posthere.com/");

    curl_easy_perform(handle); /* post away! */
~~~

Simple enough, huh? Since you set the POST options with the
CURLOPT_POSTFIELDS(3), this automatically switches the handle to use
POST in the upcoming request.

What if you want to post binary data that also requires you to set the
Content-Type: header of the post? Well, binary posts prevent libcurl from being
able to do strlen() on the data to figure out the size, so therefore we must
tell libcurl the size of the post data. Setting headers in libcurl requests are
done in a generic way, by building a list of our own headers and then passing
that list to libcurl.

~~~c
 struct curl_slist *headers=NULL;
 headers = curl_slist_append(headers, "Content-Type: text/xml");

 /* post binary data */
 curl_easy_setopt(handle, CURLOPT_POSTFIELDS, binaryptr);

 /* set the size of the postfields data */
 curl_easy_setopt(handle, CURLOPT_POSTFIELDSIZE, 23L);

 /* pass our list of custom made headers */
 curl_easy_setopt(handle, CURLOPT_HTTPHEADER, headers);

 curl_easy_perform(handle); /* post away! */

 curl_slist_free_all(headers); /* free the header list */
~~~

While the simple examples above cover the majority of all cases where HTTP
POST operations are required, they do not do multi-part formposts. Multi-part
formposts were introduced as a better way to post (possibly large) binary data
and were first documented in the RFC 1867 (updated in RFC 2388). They are
called multi-part because they are built by a chain of parts, each part being
a single unit of data. Each part has its own name and contents. You can in
fact create and post a multi-part formpost with the regular libcurl POST
support described above, but that would require that you build a formpost
yourself and provide to libcurl.

To make that easier, libcurl provides a MIME API consisting in several
functions: using those, you can create and fill a multi-part form. Function
curl_mime_init(3) creates a multi-part body; you can then append new parts
to a multi-part body using curl_mime_addpart(3).

There are three possible data sources for a part: memory using
curl_mime_data(3), file using curl_mime_filedata(3) and user-defined data
read callback using curl_mime_data_cb(3). curl_mime_name(3) sets a part's
(i.e.: form field) name, while curl_mime_filename(3) fills in the remote
filename. With curl_mime_type(3), you can tell the MIME type of a part,
curl_mime_headers(3) allows defining the part's headers. When a multi-part
body is no longer needed, you can destroy it using curl_mime_free(3).

The following example sets two simple text parts with plain textual contents,
and then a file with binary contents and uploads the whole thing.

~~~c
 curl_mime *multipart = curl_mime_init(handle);
 curl_mimepart *part = curl_mime_addpart(multipart);
 curl_mime_name(part, "name");
 curl_mime_data(part, "daniel", CURL_ZERO_TERMINATED);
 part = curl_mime_addpart(multipart);
 curl_mime_name(part, "project");
 curl_mime_data(part, "curl", CURL_ZERO_TERMINATED);
 part = curl_mime_addpart(multipart);
 curl_mime_name(part, "logotype-image");
 curl_mime_filedata(part, "curl.png");

 /* Set the form info */
 curl_easy_setopt(handle, CURLOPT_MIMEPOST, multipart);

 curl_easy_perform(handle); /* post away! */

 /* free the post data again */
 curl_mime_free(multipart);
~~~

To post multiple files for a single form field, you must supply each file in
a separate part, all with the same field name. Although function
curl_mime_subparts(3) implements nested multi-parts, this way of
multiple files posting is deprecated by RFC 7578, chapter 4.3.

To set the data source from an already opened FILE pointer, use:

~~~c
 curl_mime_data_cb(part, filesize, (curl_read_callback) fread,
                   (curl_seek_callback) fseek, NULL, filepointer);
~~~

A deprecated curl_formadd(3) function is still supported in libcurl.
It should however not be used anymore for new designs and programs using it
ought to be converted to the MIME API. It is however described here as an
aid to conversion.

Using *curl_formadd*, you add parts to the form. When you are done adding
parts, you post the whole form.

The MIME API example above is expressed as follows using this function:

~~~c
 struct curl_httppost *post=NULL;
 struct curl_httppost *last=NULL;
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "name",
              CURLFORM_COPYCONTENTS, "daniel", CURLFORM_END);
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "project",
              CURLFORM_COPYCONTENTS, "curl", CURLFORM_END);
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "logotype-image",
              CURLFORM_FILECONTENT, "curl.png", CURLFORM_END);

 /* Set the form info */
 curl_easy_setopt(handle, CURLOPT_HTTPPOST, post);

 curl_easy_perform(handle); /* post away! */

 /* free the post data again */
 curl_formfree(post);
~~~

Multipart formposts are chains of parts using MIME-style separators and
headers. It means that each one of these separate parts get a few headers set
that describe the individual content-type, size etc. To enable your
application to handicraft this formpost even more, libcurl allows you to
supply your own set of custom headers to such an individual form part. You can
of course supply headers to as many parts as you like, but this little example
shows how you set headers to one specific part when you add that to the post
handle:

~~~c
 struct curl_slist *headers=NULL;
 headers = curl_slist_append(headers, "Content-Type: text/xml");

 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "logotype-image",
              CURLFORM_FILECONTENT, "curl.xml",
              CURLFORM_CONTENTHEADER, headers,
              CURLFORM_END);

 curl_easy_perform(handle); /* post away! */

 curl_formfree(post); /* free post */
 curl_slist_free_all(headers); /* free custom header list */
~~~

Since all options on an easy handle are "sticky", they remain the same until
changed even if you do call curl_easy_perform(3), you may need to tell
curl to go back to a plain GET request if you intend to do one as your next
request. You force an easy handle to go back to GET by using the
CURLOPT_HTTPGET(3) option:
~~~c
 curl_easy_setopt(handle, CURLOPT_HTTPGET, 1L);
~~~
Just setting CURLOPT_POSTFIELDS(3) to "" or NULL does *not* stop libcurl
from doing a POST. It just makes it POST without any data to send!

# Converting from deprecated form API to MIME API

Four rules have to be respected in building the multi-part:

- The easy handle must be created before building the multi-part.

- The multi-part is always created by a call to curl_mime_init(handle).

- Each part is created by a call to curl_mime_addpart(multipart).

- When complete, the multi-part must be bound to the easy handle using
CURLOPT_MIMEPOST(3) instead of CURLOPT_HTTPPOST(3).

Here are some example of *curl_formadd* calls to MIME API sequences:

~~~c
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "id",
              CURLFORM_COPYCONTENTS, "daniel", CURLFORM_END);
              CURLFORM_CONTENTHEADER, headers,
              CURLFORM_END);
~~~
becomes:
~~~c
 part = curl_mime_addpart(multipart);
 curl_mime_name(part, "id");
 curl_mime_data(part, "daniel", CURL_ZERO_TERMINATED);
 curl_mime_headers(part, headers, FALSE);
~~~

Setting the last curl_mime_headers(3) argument to TRUE would have caused
the headers to be automatically released upon destroyed the multi-part, thus
saving a clean-up call to curl_slist_free_all(3).

~~~c
 curl_formadd(&post, &last,
              CURLFORM_PTRNAME, "logotype-image",
              CURLFORM_FILECONTENT, "-",
              CURLFORM_END);
~~~
becomes:
~~~c
 part = curl_mime_addpart(multipart);
 curl_mime_name(part, "logotype-image");
 curl_mime_data_cb(part, (curl_off_t) -1, fread, fseek, NULL, stdin);
~~~

curl_mime_name(3) always copies the field name. The special file name
"-" is not supported by curl_mime_filename(3): to read an open file, use
a callback source using fread(). The transfer is be chunk-encoded since the
data size is unknown.

~~~c
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "datafile[]",
              CURLFORM_FILE, "file1",
              CURLFORM_FILE, "file2",
              CURLFORM_END);
~~~
becomes:
~~~c
 part = curl_mime_addpart(multipart);
 curl_mime_name(part, "datafile[]");
 curl_mime_filedata(part, "file1");
 part = curl_mime_addpart(multipart);
 curl_mime_name(part, "datafile[]");
 curl_mime_filedata(part, "file2");
~~~

The deprecated multipart/mixed implementation of multiple files field is
translated to two distinct parts with the same name.

~~~c
 curl_easy_setopt(handle, CURLOPT_READFUNCTION, myreadfunc);
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "stream",
              CURLFORM_STREAM, arg,
              CURLFORM_CONTENTLEN, (curl_off_t) datasize,
              CURLFORM_FILENAME, "archive.zip",
              CURLFORM_CONTENTTYPE, "application/zip",
              CURLFORM_END);
~~~
becomes:
~~~c
 part = curl_mime_addpart(multipart);
 curl_mime_name(part, "stream");
 curl_mime_data_cb(part, (curl_off_t) datasize,
                   myreadfunc, NULL, NULL, arg);
 curl_mime_filename(part, "archive.zip");
 curl_mime_type(part, "application/zip");
~~~

CURLOPT_READFUNCTION(3) callback is not used: it is replace by directly
setting the part source data from the callback read function.

~~~c
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "memfile",
              CURLFORM_BUFFER, "memfile.bin",
              CURLFORM_BUFFERPTR, databuffer,
              CURLFORM_BUFFERLENGTH, (long) sizeof databuffer,
              CURLFORM_END);
~~~
becomes:
~~~c
 part = curl_mime_addpart(multipart);
 curl_mime_name(part, "memfile");
 curl_mime_data(part, databuffer, (curl_off_t) sizeof databuffer);
 curl_mime_filename(part, "memfile.bin");
~~~

curl_mime_data(3) always copies the initial data: data buffer is thus
free for immediate reuse.

~~~c
 curl_formadd(&post, &last,
              CURLFORM_COPYNAME, "message",
              CURLFORM_FILECONTENT, "msg.txt",
              CURLFORM_END);
~~~
becomes:
~~~c
 part = curl_mime_addpart(multipart);
 curl_mime_name(part, "message");
 curl_mime_filedata(part, "msg.txt");
 curl_mime_filename(part, NULL);
~~~

Use of curl_mime_filedata(3) sets the remote filename as a side effect: it is
therefore necessary to clear it for *CURLFORM_FILECONTENT* emulation.

# Showing Progress

For historical and traditional reasons, libcurl has a built-in progress meter
that can be switched on and then makes it present a progress meter in your
terminal.

Switch on the progress meter by, oddly enough, setting
CURLOPT_NOPROGRESS(3) to zero. This option is set to 1 by default.

For most applications however, the built-in progress meter is useless and what
instead is interesting is the ability to specify a progress callback. The
function pointer you pass to libcurl is then called on irregular intervals
with information about the current transfer.

Set the progress callback by using CURLOPT_PROGRESSFUNCTION(3). Pass a pointer
to a function that matches this prototype:

~~~c
 int progress_callback(void *clientp,
                       double dltotal,
                       double dlnow,
                       double ultotal,
                       double ulnow);
~~~

If any of the input arguments is unknown, a 0 is provided. The first argument,
the 'clientp' is the pointer you pass to libcurl with
CURLOPT_PROGRESSDATA(3). libcurl does not touch it.

# libcurl with C++

There is basically only one thing to keep in mind when using C++ instead of C
when interfacing libcurl:

The callbacks CANNOT be non-static class member functions

Example C++ code:

~~~c
class AClass {
    static size_t write_data(void *ptr, size_t size, size_t nmemb,
                             void *ourpointer)
    {
      /* do what you want with the data */
    }
 }
~~~

# Proxies

What "proxy" means according to Merriam-Webster: "a person authorized to act
for another" but also "the agency, function, or office of a deputy who acts as
a substitute for another".

Proxies are exceedingly common these days. Companies often only offer Internet
access to employees through their proxies. Network clients or user-agents ask
the proxy for documents, the proxy does the actual request and then it returns
them.

libcurl supports SOCKS and HTTP proxies. When a given URL is wanted, libcurl
asks the proxy for it instead of trying to connect to the actual remote host
identified in the URL.

If you are using a SOCKS proxy, you may find that libcurl does not quite support
all operations through it.

For HTTP proxies: the fact that the proxy is an HTTP proxy puts certain
restrictions on what can actually happen. A requested URL that might not be a
HTTP URL is passed to the HTTP proxy to deliver back to libcurl. This happens
transparently, and an application may not need to know. I say "may", because
at times it is important to understand that all operations over an HTTP proxy
use the HTTP protocol. For example, you cannot invoke your own custom FTP
commands or even proper FTP directory listings.

## Proxy Options

To tell libcurl to use a proxy at a given port number:
~~~c
 curl_easy_setopt(handle, CURLOPT_PROXY, "proxy-host.com:8080");
~~~
Some proxies require user authentication before allowing a request, and you
pass that information similar to this:
~~~c
 curl_easy_setopt(handle, CURLOPT_PROXYUSERPWD, "user:password");
~~~
If you want to, you can specify the hostname only in the
CURLOPT_PROXY(3) option, and set the port number separately with
CURLOPT_PROXYPORT(3).

Tell libcurl what kind of proxy it is with CURLOPT_PROXYTYPE(3) (if not,
it defaults to assuming an HTTP proxy):
~~~c
 curl_easy_setopt(handle, CURLOPT_PROXYTYPE, CURLPROXY_SOCKS4);
~~~

## Environment Variables

libcurl automatically checks and uses a set of environment variables to know
what proxies to use for certain protocols. The names of the variables are
following an old tradition and are built up as "[protocol]_proxy" (note the
lower casing). Which makes the variable 'http_proxy' checked for a name of a
proxy to use when the input URL is HTTP. Following the same rule, the variable
named 'ftp_proxy' is checked for FTP URLs. Again, the proxies are always HTTP
proxies, the different names of the variables simply allows different HTTP
proxies to be used.

The proxy environment variable contents should be in the format
"[protocol://][user:password@]machine[:port]". Where the protocol:// part
specifies which type of proxy it is, and the optional port number specifies on
which port the proxy operates. If not specified, the internal default port
number is used and that is most likely not the one you would like it to be.

There are two special environment variables. 'all_proxy' is what sets proxy
for any URL in case the protocol specific variable was not set, and 'no_proxy'
defines a list of hosts that should not use a proxy even though a variable may
say so. If 'no_proxy' is a plain asterisk ("*") it matches all hosts.

To explicitly disable libcurl's checking for and using the proxy environment
variables, set the proxy name to "" - an empty string - with
CURLOPT_PROXY(3).

## SSL and Proxies

SSL is for secure point-to-point connections. This involves strong encryption
and similar things, which effectively makes it impossible for a proxy to
operate as a "man in between" which the proxy's task is, as previously
discussed. Instead, the only way to have SSL work over an HTTP proxy is to ask
the proxy to tunnel everything through without being able to check or fiddle
with the traffic.

Opening an SSL connection over an HTTP proxy is therefore a matter of asking the
proxy for a straight connection to the target host on a specified port. This
is made with the HTTP request CONNECT. ("please dear proxy, connect me to that
remote host").

Because of the nature of this operation, where the proxy has no idea what kind
of data that is passed in and out through this tunnel, this breaks some of the
few advantages that come from using a proxy, such as caching. Many
organizations prevent this kind of tunneling to other destination port numbers
than 443 (which is the default HTTPS port number).

## Tunneling Through Proxy

As explained above, tunneling is required for SSL to work and often even
restricted to the operation intended for SSL; HTTPS.

This is however not the only time proxy-tunneling might offer benefits to
you or your application.

As tunneling opens a direct connection from your application to the remote
machine, it suddenly also re-introduces the ability to do non-HTTP
operations over an HTTP proxy. You can in fact use things such as FTP
upload or FTP custom commands this way.

Again, this is often prevented by the administrators of proxies and is
rarely allowed.

Tell libcurl to use proxy tunneling like this:
~~~c
 curl_easy_setopt(handle, CURLOPT_HTTPPROXYTUNNEL, 1L);
~~~
In fact, there might even be times when you want to do plain HTTP operations
using a tunnel like this, as it then enables you to operate on the remote
server instead of asking the proxy to do so. libcurl does not stand in the way
for such innovative actions either!

## Proxy Auto-Config

Netscape first came up with this. It is basically a webpage (usually using a
.pac extension) with a JavaScript that when executed by the browser with the
requested URL as input, returns information to the browser on how to connect
to the URL. The returned information might be "DIRECT" (which means no proxy
should be used), "PROXY host:port" (to tell the browser where the proxy for
this particular URL is) or "SOCKS host:port" (to direct the browser to a SOCKS
proxy).

libcurl has no means to interpret or evaluate JavaScript and thus it does not
support this. If you get yourself in a position where you face this nasty
invention, the following advice have been mentioned and used in the past:

- Depending on the JavaScript complexity, write up a script that translates it
to another language and execute that.

- Read the JavaScript code and rewrite the same logic in another language.

- Implement a JavaScript interpreter; people have successfully used the
Mozilla JavaScript engine in the past.

- Ask your admins to stop this, for a static proxy setup or similar.

# Persistence Is The Way to Happiness

Re-cycling the same easy handle several times when doing multiple requests is
the way to go.

After each single curl_easy_perform(3) operation, libcurl keeps the
connection alive and open. A subsequent request using the same easy handle to
the same host might just be able to use the already open connection! This
reduces network impact a lot.

Even if the connection is dropped, all connections involving SSL to the same
host again, benefit from libcurl's session ID cache that drastically reduces
re-connection time.

FTP connections that are kept alive save a lot of time, as the command-
response round-trips are skipped, and also you do not risk getting blocked
without permission to login again like on many FTP servers only allowing N
persons to be logged in at the same time.

libcurl caches DNS name resolving results, to make lookups of a previously
looked up name a lot faster.

Other interesting details that improve performance for subsequent requests
may also be added in the future.

Each easy handle attempts to keep the last few connections alive for a while
in case they are to be used again. You can set the size of this "cache" with
the CURLOPT_MAXCONNECTS(3) option. Default is 5. There is rarely any
point in changing this value, and if you think of changing this it is often
just a matter of thinking again.

To force your upcoming request to not use an already existing connection, you
can do that by setting CURLOPT_FRESH_CONNECT(3) to 1. In a similar
spirit, you can also forbid the upcoming request to be "lying" around and
possibly get reused after the request by setting
CURLOPT_FORBID_REUSE(3) to 1.

# HTTP Headers Used by libcurl

When you use libcurl to do HTTP requests, it passes along a series of headers
automatically. It might be good for you to know and understand these. You can
replace or remove them by using the CURLOPT_HTTPHEADER(3) option.

## Host

This header is required by HTTP 1.1 and even many 1.0 servers and should be
the name of the server we want to talk to. This includes the port number if
anything but default.

## Accept

"*/*"

## Expect

When doing POST requests, libcurl sets this header to "100-continue" to ask
the server for an "OK" message before it proceeds with sending the data part
of the post. If the posted data amount is deemed "small", libcurl does not use
this header.

# Customizing Operations

There is an ongoing development today where more and more protocols are built
upon HTTP for transport. This has obvious benefits as HTTP is a tested and
reliable protocol that is widely deployed and has excellent proxy-support.

When you use one of these protocols, and even when doing other kinds of
programming you may need to change the traditional HTTP (or FTP or...)
manners. You may need to change words, headers or various data.

libcurl is your friend here too.

## CUSTOMREQUEST

If just changing the actual HTTP request keyword is what you want, like when
GET, HEAD or POST is not good enough for you, CURLOPT_CUSTOMREQUEST(3)
is there for you. It is simple to use:
~~~c
curl_easy_setopt(handle, CURLOPT_CUSTOMREQUEST, "MYOWNREQUEST");
~~~
When using the custom request, you change the request keyword of the actual
request you are performing. Thus, by default you make a GET request but you
can also make a POST operation (as described before) and then replace the POST
keyword if you want to. You are the boss.

## Modify Headers

HTTP-like protocols pass a series of headers to the server when doing the
request, and you are free to pass any amount of extra headers that you
think fit. Adding headers is this easy:

~~~c
struct curl_slist *headers=NULL; /* init to NULL is important */

headers = curl_slist_append(headers, "Hey-server-hey: how are you?");
headers = curl_slist_append(headers, "X-silly-content: yes");

/* pass our list of custom made headers */
curl_easy_setopt(handle, CURLOPT_HTTPHEADER, headers);

curl_easy_perform(handle); /* transfer http */

curl_slist_free_all(headers); /* free the header list */
~~~

... and if you think some of the internally generated headers, such as Accept:
or Host: do not contain the data you want them to contain, you can replace
them by simply setting them too:

~~~c
headers = curl_slist_append(headers, "Accept: Agent-007");
headers = curl_slist_append(headers, "Host: munged.host.line");
~~~

## Delete Headers

If you replace an existing header with one with no contents, you prevent the
header from being sent. For instance, if you want to completely prevent the
"Accept:" header from being sent, you can disable it with code similar to
this:

 headers = curl_slist_append(headers, "Accept:");

Both replacing and canceling internal headers should be done with careful
consideration and you should be aware that you may violate the HTTP protocol
when doing so.

## Enforcing chunked transfer-encoding

By making sure a request uses the custom header "Transfer-Encoding: chunked"
when doing a non-GET HTTP operation, libcurl switches over to "chunked"
upload, even though the size of the data to upload might be known. By default,
libcurl usually switches over to chunked upload automatically if the upload
data size is unknown.

## HTTP Version

All HTTP requests includes the version number to tell the server which version
we support. libcurl speaks HTTP 1.1 by default. Some old servers do not like
getting 1.1-requests and when dealing with stubborn old things like that, you
can tell libcurl to use 1.0 instead by doing something like this:

 curl_easy_setopt(handle, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_1_0);

## FTP Custom Commands

Not all protocols are HTTP-like, and thus the above may not help you when
you want to make, for example, your FTP transfers to behave differently.

Sending custom commands to an FTP server means that you need to send the
commands exactly as the FTP server expects them (RFC 959 is a good guide
here), and you can only use commands that work on the control-connection
alone. All kinds of commands that require data interchange and thus need a
data-connection must be left to libcurl's own judgment. Also be aware that
libcurl does its best to change directory to the target directory before doing
any transfer, so if you change directory (with CWD or similar) you might
confuse libcurl and then it might not attempt to transfer the file in the
correct remote directory.

A little example that deletes a given file before an operation:

~~~c
 headers = curl_slist_append(headers, "DELE file-to-remove");

 /* pass the list of custom commands to the handle */
 curl_easy_setopt(handle, CURLOPT_QUOTE, headers);

 curl_easy_perform(handle); /* transfer ftp data! */

 curl_slist_free_all(headers); /* free the header list */
~~~

If you would instead want this operation (or chain of operations) to happen
_after_ the data transfer took place the option to curl_easy_setopt(3)
would instead be called CURLOPT_POSTQUOTE(3) and used the exact same
way.

The custom FTP commands are issued to the server in the same order they are
added to the list, and if a command gets an error code returned back from the
server, no more commands are issued and libcurl bails out with an error code
(CURLE_QUOTE_ERROR). Note that if you use CURLOPT_QUOTE(3) to send
commands before a transfer, no transfer actually takes place when a quote
command has failed.

If you set the CURLOPT_HEADER(3) to 1, you tell libcurl to get
information about the target file and output "headers" about it. The headers
are in "HTTP-style", looking like they do in HTTP.

The option to enable headers or to run custom FTP commands may be useful to
combine with CURLOPT_NOBODY(3). If this option is set, no actual file
content transfer is performed.

## FTP Custom CUSTOMREQUEST

If you do want to list the contents of an FTP directory using your own defined
FTP command, CURLOPT_CUSTOMREQUEST(3) does just that. "NLST" is the
default one for listing directories but you are free to pass in your idea of a
good alternative.

# Cookies Without Chocolate Chips

In the HTTP sense, a cookie is a name with an associated value. A server sends
the name and value to the client, and expects it to get sent back on every
subsequent request to the server that matches the particular conditions
set. The conditions include that the domain name and path match and that the
cookie has not become too old.

In real-world cases, servers send new cookies to replace existing ones to
update them. Server use cookies to "track" users and to keep "sessions".

Cookies are sent from server to clients with the header Set-Cookie: and
they are sent from clients to servers with the Cookie: header.

To just send whatever cookie you want to a server, you can use
CURLOPT_COOKIE(3) to set a cookie string like this:
~~~c
 curl_easy_setopt(handle, CURLOPT_COOKIE, "name1=var1; name2=var2;");
~~~
In many cases, that is not enough. You might want to dynamically save
whatever cookies the remote server passes to you, and make sure those cookies
are then used accordingly on later requests.

One way to do this, is to save all headers you receive in a plain file and
when you make a request, you tell libcurl to read the previous headers to
figure out which cookies to use. Set the header file to read cookies from with
CURLOPT_COOKIEFILE(3).

The CURLOPT_COOKIEFILE(3) option also automatically enables the cookie
parser in libcurl. Until the cookie parser is enabled, libcurl does not parse
or understand incoming cookies and they are just be ignored. However, when the
parser is enabled the cookies are understood and the cookies are kept in
memory and used properly in subsequent requests when the same handle is
used. Many times this is enough, and you may not have to save the cookies to
disk at all. Note that the file you specify to CURLOPT_COOKIEFILE(3)
does not have to exist to enable the parser, so a common way to just enable
the parser and not read any cookies is to use the name of a file you know does
not exist.

If you would rather use existing cookies that you have previously received
with your Netscape or Mozilla browsers, you can make libcurl use that cookie
file as input. The CURLOPT_COOKIEFILE(3) is used for that too, as
libcurl automatically finds out what kind of file it is and acts accordingly.

Perhaps the most advanced cookie operation libcurl offers, is saving the
entire internal cookie state back into a Netscape/Mozilla formatted cookie
file. We call that the cookie-jar. When you set a filename with
CURLOPT_COOKIEJAR(3), that filename is created and all received cookies get
stored in it when curl_easy_cleanup(3) is called. This enables cookies to get
passed on properly between multiple handles without any information getting
lost.

# FTP Peculiarities We Need

FTP transfers use a second TCP/IP connection for the data transfer. This is
usually a fact you can forget and ignore but at times this detail comes back
to haunt you. libcurl offers several different ways to customize how the
second connection is being made.

libcurl can either connect to the server a second time or tell the server to
connect back to it. The first option is the default and it is also what works
best for all the people behind firewalls, NATs or IP-masquerading setups.
libcurl then tells the server to open up a new port and wait for a second
connection. This is by default attempted with EPSV first, and if that does not
work it tries PASV instead. (EPSV is an extension to the original FTP spec
and does not exist nor work on all FTP servers.)

You can prevent libcurl from first trying the EPSV command by setting
CURLOPT_FTP_USE_EPSV(3) to zero.

In some cases, you want to have the server connect back to you for the second
connection. This might be when the server is perhaps behind a firewall or
something and only allows connections on a single port. libcurl then informs
the remote server which IP address and port number to connect to. This is made
with the CURLOPT_FTPPORT(3) option. If you set it to "-", libcurl uses your
system's "default IP address". If you want to use a particular IP, you can set
the full IP address, a hostname to resolve to an IP address or even a local
network interface name that libcurl gets the IP address from.

When doing the "PORT" approach, libcurl attempts to use the EPRT and the LPRT
before trying PORT, as they work with more protocols. You can disable this
behavior by setting CURLOPT_FTP_USE_EPRT(3) to zero.

# MIME API revisited for SMTP and IMAP

In addition to support HTTP multi-part form fields, the MIME API can be used
to build structured email messages and send them via SMTP or append such
messages to IMAP directories.

A structured email message may contain several parts: some are displayed
inline by the MUA, some are attachments. Parts can also be structured as
multi-part, for example to include another email message or to offer several
text formats alternatives. This can be nested to any level.

To build such a message, you prepare the nth-level multi-part and then include
it as a source to the parent multi-part using function
curl_mime_subparts(3). Once it has been
bound to its parent multi-part, a nth-level multi-part belongs to it and
should not be freed explicitly.

Email messages data is not supposed to be non-ascii and line length is
limited: fortunately, some transfer encodings are defined by the standards to
support the transmission of such incompatible data. Function
curl_mime_encoder(3) tells a part that its source data must be encoded
before being sent. It also generates the corresponding header for that part.
If the part data you want to send is already encoded in such a scheme, do not
use this function (this would over-encode it), but explicitly set the
corresponding part header.

Upon sending such a message, libcurl prepends it with the header list
set with CURLOPT_HTTPHEADER(3), as zero level mime part headers.

Here is an example building an email message with an inline plain/html text
alternative and a file attachment encoded in base64:

~~~c
 curl_mime *message = curl_mime_init(handle);

 /* The inline part is an alternative proposing the html and the text
    versions of the email. */
 curl_mime *alt = curl_mime_init(handle);

 /* HTML message. */
 curl_mimepart *part = curl_mime_addpart(alt);
 curl_mime_data(part, "<html><body><p>This is HTML</p></body></html>",
                      CURL_ZERO_TERMINATED);
 curl_mime_type(part, "text/html");

 /* Text message. */
 part = curl_mime_addpart(alt);
 curl_mime_data(part, "This is plain text message",
                      CURL_ZERO_TERMINATED);

 /* Create the inline part. */
 part = curl_mime_addpart(message);
 curl_mime_subparts(part, alt);
 curl_mime_type(part, "multipart/alternative");
 struct curl_slist *headers = curl_slist_append(NULL,
                   "Content-Disposition: inline");
 curl_mime_headers(part, headers, TRUE);

 /* Add the attachment. */
 part = curl_mime_addpart(message);
 curl_mime_filedata(part, "manual.pdf");
 curl_mime_encoder(part, "base64");

 /* Build the mail headers. */
 headers = curl_slist_append(NULL, "From: me@example.com");
 headers = curl_slist_append(headers, "To: you@example.com");

 /* Set these into the easy handle. */
 curl_easy_setopt(handle, CURLOPT_HTTPHEADER, headers);
 curl_easy_setopt(handle, CURLOPT_MIMEPOST, mime);
~~~

It should be noted that appending a message to an IMAP directory requires
the message size to be known prior upload. It is therefore not possible to
include parts with unknown data size in this context.

# Headers Equal Fun

Some protocols provide "headers", meta-data separated from the normal
data. These headers are by default not included in the normal data stream, but
you can make them appear in the data stream by setting CURLOPT_HEADER(3)
to 1.

What might be even more useful, is libcurl's ability to separate the headers
from the data and thus make the callbacks differ. You can for example set a
different pointer to pass to the ordinary write callback by setting
CURLOPT_HEADERDATA(3).

Or, you can set an entirely separate function to receive the headers, by using
CURLOPT_HEADERFUNCTION(3).

The headers are passed to the callback function one by one, and you can
depend on that fact. It makes it easier for you to add custom header parsers
etc.

"Headers" for FTP transfers equal all the FTP server responses. They are not
actually true headers, but in this case we pretend they are! ;-)

# Post Transfer Information

See curl_easy_getinfo(3).

# The multi Interface

The easy interface as described in detail in this document is a synchronous
interface that transfers one file at a time and does not return until it is
done.

The multi interface, on the other hand, allows your program to transfer
multiple files in both directions at the same time, without forcing you to use
multiple threads. The name might make it seem that the multi interface is for
multi-threaded programs, but the truth is almost the reverse. The multi
interface allows a single-threaded application to perform the same kinds of
multiple, simultaneous transfers that multi-threaded programs can perform. It
allows many of the benefits of multi-threaded transfers without the complexity
of managing and synchronizing many threads.

To complicate matters somewhat more, there are even two versions of the multi
interface. The event based one, also called multi_socket and the "normal one"
designed for using with select(). See the libcurl-multi.3 man page for details
on the multi_socket event based API, this description here is for the select()
oriented one.

To use this interface, you are better off if you first understand the basics
of how to use the easy interface. The multi interface is simply a way to make
multiple transfers at the same time by adding up multiple easy handles into
a "multi stack".

You create the easy handles you want, one for each concurrent transfer, and
you set all the options just like you learned above, and then you create a
multi handle with curl_multi_init(3) and add all those easy handles to
that multi handle with curl_multi_add_handle(3).

When you have added the handles you have for the moment (you can still add new
ones at any time), you start the transfers by calling
curl_multi_perform(3).

curl_multi_perform(3) is asynchronous. It only performs what can be done
now and then return control to your program. It is designed to never
block. You need to keep calling the function until all transfers are
completed.

The best usage of this interface is when you do a select() on all possible
file descriptors or sockets to know when to call libcurl again. This also
makes it easy for you to wait and respond to actions on your own application's
sockets/handles. You figure out what to select() for by using
curl_multi_fdset(3), that fills in a set of *fd_set* variables for
you with the particular file descriptors libcurl uses for the moment.

When you then call select(), it returns when one of the file handles signal
action and you then call curl_multi_perform(3) to allow libcurl to do
what it wants to do. Take note that libcurl does also feature some time-out
code so we advise you to never use long timeouts on select() before you call
curl_multi_perform(3) again. curl_multi_timeout(3) is provided to
help you get a suitable timeout period.

Another precaution you should use: always call curl_multi_fdset(3)
immediately before the select() call since the current set of file descriptors
may change in any curl function invoke.

If you want to stop the transfer of one of the easy handles in the stack, you
can use curl_multi_remove_handle(3) to remove individual easy
handles. Remember that easy handles should be curl_easy_cleanup(3)ed.

When a transfer within the multi stack has finished, the counter of running
transfers (as filled in by curl_multi_perform(3)) decreases. When the
number reaches zero, all transfers are done.

curl_multi_info_read(3) can be used to get information about completed
transfers. It then returns the CURLcode for each easy transfer, to allow you
to figure out success on each individual transfer.

# SSL, Certificates and Other Tricks

 [ seeding, passwords, keys, certificates, ENGINE, ca certs ]

# Sharing Data Between Easy Handles

You can share some data between easy handles when the easy interface is used,
and some data is share automatically when you use the multi interface.

When you add easy handles to a multi handle, these easy handles automatically
share a lot of the data that otherwise would be kept on a per-easy handle
basis when the easy interface is used.

The DNS cache is shared between handles within a multi handle, making
subsequent name resolving faster, and the connection pool that is kept to
better allow persistent connections and connection reuse is also shared. If
you are using the easy interface, you can still share these between specific
easy handles by using the share interface, see libcurl-share(3).

Some things are never shared automatically, not within multi handles, like for
example cookies so the only way to share that is with the share interface.

# Footnotes

## [1]

libcurl 7.10.3 and later have the ability to switch over to chunked
Transfer-Encoding in cases where HTTP uploads are done with data of an unknown
size.

## [2]

This happens on Windows machines when libcurl is built and used as a
DLL. However, you can still do this on Windows if you link with a static
library.

## [3]

The curl-config tool is generated at build-time (on Unix-like systems) and
should be installed with the 'make install' or similar instruction that
installs the library, header files, man pages etc.

## [4]

This behavior was different in versions before 7.17.0, where strings had to
remain valid past the end of the curl_easy_setopt(3) call.