![]() | ManagerConnection Events |
The ManagerConnection type exposes the following members.
Name | Description | |
---|---|---|
![]() | AgentCallbackLogin |
An AgentCallbackLogin is triggered when an agent is successfully logged in.
|
![]() | AgentCallbackLogoff |
An AgentCallbackLogoff is triggered when an agent that previously logged in is logged of. |
![]() | AgentCalled |
An AgentCalled is triggered when an agent is ring. To enable AgentCalled you have to set eventwhencalled = yes in queues.conf. |
![]() | AgentComplete |
An AgentCompleteEvent is triggered when at the end of a call if the caller was connected to an agent.
|
![]() | AgentConnect |
An AgentConnectEvent is triggered when a caller is connected to an agent.
|
![]() | AgentDump |
An AgentDumpEvent is triggered when an agent dumps the caller while listening to the queue announcement.
|
![]() | AgentLogin |
An AgentLoginEvent is triggered when an agent is successfully logged in using AgentLogin.
|
![]() | AgentLogoff |
An AgentCallbackLogoffEvent is triggered when an agent that previously logged in using AgentLogin is logged of.
|
![]() | Agents |
An AgentsEvent is triggered for each agent in response to an AgentsAction.
|
![]() | AgentsComplete |
An AgentsCompleteEvent is triggered after the state of all agents has been reported in response to an AgentsAction.
|
![]() | AGIExec |
AgiExec is execute
|
![]() | Alarm |
An AlarmEvent is triggered when a Zap channel enters or changes alarm state.
|
![]() | AlarmClear |
An AlarmEvent is triggered when a Zap channel leaves alarm state.
|
![]() | AttendedTransfer | |
![]() | BlindTransfer | |
![]() | Bridge | |
![]() | BridgeCreate | |
![]() | BridgeDestroy | |
![]() | BridgeEnter | |
![]() | BridgeLeave | |
![]() | Cdr |
A CdrEvent is triggered when a call detail record is generated, usually at the end of a call.
|
![]() | ConfbridgeEnd |
This event is sent when the last user leaves a conference and it is torn down.
|
![]() | ConfbridgeJoin |
This event is sent when a user joins a conference - either one already in progress or as the first user to join a newly instantiated bridge.
|
![]() | ConfbridgeLeave |
This event is sent when a user leaves a conference.
|
![]() | ConfbridgeStart |
This event is sent when the first user requests a conference and it is instantiated
|
![]() | ConfbridgeTalking |
This event is sent when the conference detects that a user has either begin or stopped talking.
|
![]() | ConnectionState |
A ConnectionState is triggered after Connect/Disconnect/Reload/Shutdown events.
|
![]() | DBGetResponse | |
![]() | Dial |
A Dial is triggered whenever a phone attempts to dial someone. |
![]() | DialBegin |
Raised when a dial action has started. |
![]() | DialEnd |
Raised when a dial action has completed. |
![]() | DNDState |
A DNDStateEvent is triggered by the Zap channel driver when a channel enters or leaves DND (do not disturb) state.
|
![]() | DTMF | |
![]() | ExtensionStatus |
An ExtensionStatus is triggered when the state of an extension changes. |
![]() | FailedACL | |
![]() | Hangup |
A Hangup is triggered when a channel is hung up. |
![]() | Hold |
A Hold is triggered by the SIP channel driver when a channel is put on hold. |
![]() | HoldedCall |
A HoldedCall is triggered when a channel is put on hold. |
![]() | Join |
A Join is triggered when a channel joines a queue. |
![]() | Leave |
A Leave is triggered when a channel leaves a queue. |
![]() | Link |
A Link is triggered when two voice channels are linked together and voice data exchange commences. Several Link events may be seen for a single call. This can occur when Asterisk fails to setup a native bridge for the call.This is when Asterisk must sit between two telephones and perform CODEC conversion on their behalf. |
![]() | LogChannel |
A LogChannel is triggered when logging is turned on or off. |
![]() | MeetMeJoin |
A MeetMeJoin is triggered if a channel joins a meet me conference. |
![]() | MeetMeLeave |
A MeetMeLeave is triggered if a channel leaves a meet me conference. |
![]() | MeetMeTalking |
A MeetMeTalkingEvent is triggered when a user starts talking in a meet me conference. To enable talker detection you must pass the option 'T' to the MeetMe application. |
![]() | MessageWaiting |
A MessageWaiting is triggered when someone leaves voicemail. |
![]() | NewCallerId |
A NewCallerId is triggered when the caller id of a channel changes. |
![]() | NewChannel |
A NewChannel is triggered when a new channel is created. |
![]() | NewExten |
A NewExten is triggered when a channel is connected to a new extension. |
![]() | NewState |
A NewState is triggered when the state of a channel has changed. |
![]() | OriginateResponse |
An OriginateResponse is triggered when the execution of an Originate.
|
![]() | ParkedCall |
A ParkedCall is triggered when a channel is parked (in this case no
action id is set) and in response to a ParkedCallsAction. |
![]() | ParkedCallGiveUp |
A ParkedCallGiveUp is triggered when a channel that has been parked is hung up. |
![]() | ParkedCallsComplete |
A ParkedCallsComplete is triggered after all parked calls have been reported in response to a ParkedCallsAction.
|
![]() | ParkedCallTimeOut |
A ParkedCallTimeOut is triggered when call parking times out for a given channel. |
![]() | PeerEntry |
A PeerEntry is triggered in response to a SIPPeersAction or SIPShowPeerAction and contains information about a peer. |
![]() | PeerlistComplete |
A PeerlistComplete is triggered after the details of all peers has been reported in response to an SIPPeersAction or SIPShowPeerAction. |
![]() | PeerStatus |
A PeerStatus is triggered when a SIP or IAX client attempts to registrer at this asterisk server. |
![]() | QueueCallerAbandon |
A QueueEntryEvent is triggered in response to a QueueStatusAction and contains information about an entry in a queue.
|
![]() | QueueCallerJoin |
Raised when a caller joins a Queue. |
![]() | QueueCallerLeave |
Raised when a caller leaves a Queue. |
![]() | QueueEntry |
A QueueEntryEvent is triggered in response to a QueueStatusAction and contains information about an entry in a queue.
|
![]() | QueueMember |
A QueueMemberEvent is triggered in response to a QueueStatusAction and contains information about a member of a queue.
|
![]() | QueueMemberAdded |
A QueueMemberAddedEvent is triggered when a queue member is added to a queue.
|
![]() | QueueMemberPause |
A QueueMemberPauseEvent is triggered when a queue member is paused or unpaused. Available since : Asterisk 12. |
![]() | QueueMemberPaused |
A QueueMemberPausedEvent is triggered when a queue member is paused or unpaused.
Replaced by : QueueMemberPauseEvent since Asterisk 12. Removed since : Asterisk 13. |
![]() | QueueMemberRemoved |
A QueueMemberRemovedEvent is triggered when a queue member is removed from a queue.
|
![]() | QueueMemberStatus |
A QueueMemberStatusEvent shows the status of a QueueMemberEvent.
|
![]() | QueueParams |
A QueueParamsEvent is triggered in response to a QueueStatusAction and contains the parameters of a queue.
|
![]() | QueueStatusComplete |
A QueueStatusCompleteEvent is triggered after the state of all queues has been reported in response to a QueueStatusAction.
|
![]() | Registry |
A Registry is triggered when this asterisk server attempts to register
as a client at another SIP or IAX server. |
![]() | Rename |
A RenameEvent is triggered when the name of a channel is changed.
|
![]() | Status |
A StatusEvent is triggered for each active channel in response to a StatusAction.
|
![]() | StatusComplete |
A StatusCompleteEvent is triggered after the state of all channels has been reported in response to a StatusAction.
|
![]() | Transfer | |
![]() | UnhandledEvent |
An UnhandledEvent is triggered on unknown event.
|
![]() | Unhold |
An UnholdEvent is triggered by the SIP channel driver when a channel is no longer put on hold.
|
![]() | Unlink |
An UnlinkEvent is triggered when a link between two voice channels is discontinued, for example, just before call completion.
|
![]() | UnparkedCall |
A UnparkedCallEvent is triggered when a channel that has been parked is resumed.
|
![]() | UserEvents |
A ZapShowChannelsEvent is triggered on UserEvent in dialplan.
|
![]() | VarSet |
When a variable is set
|
![]() | ZapShowChannels |
A ZapShowChannelsEvent is triggered in response to a ZapShowChannelsAction and shows the state of a zap channel.
|
![]() | ZapShowChannelsComplete |
A ZapShowChannelsCompleteEvent is triggered after the state of all zap channels has been reported in response to a ZapShowChannelsAction.
|