dockapps/wmpop3lb
2017-02-24 10:08:06 +00:00
..
wmpop3 wmpop3lb: Use wmgeneral from libdockapp. 2017-02-24 10:08:06 +00:00
CHANGE_LOG Remove trailing whitespace in recently added dockapps. 2016-12-24 12:32:17 +00:00
COPYING wmpop3lb: Add version 2.4.2 to repository. 2016-11-28 08:57:10 +00:00
INSTALL Remove trailing whitespace in recently added dockapps. 2016-12-24 12:32:17 +00:00
README Remove trailing whitespace in recently added dockapps. 2016-12-24 12:32:17 +00:00

WMpop3LB2.4
=================================

Written by Louis-Benoit JOURDAIN (lb@jourdain.org)

This software is based on Wmpop3-0.5.6 by Scott Holden ( scotth@thezone.net )

WARNING!!! WMPop3LB is to be used at your own risk. I will not be held
responsible for any damages this application may cause to your system.

1) WHAT IS THIS
   WMPop3LB is a multi POP3 mail box checker. It will connect to up to 6
   POP3 servers to check if you have mail, get the "From:" and "Subject:"
   header fields of each mail and display them in a 7 lines window.
   If there are more than 7 mails, they can be read by scrolling the window
   up and down.
   Messages can be deleted directly off the servers by selecting the mails
   to delete and clicking the "delete" button.
   A command to spawn can be specified for each new received message, for
   selected messages (by clicking on the "open" button) or to launch a
   mailclient.

2) How do I configure WMPop3LB
   WMPop3LB when first executed will check if there is a .wmpop3rc file in
   the user's home directory, it will create it if it can not be located.
   This file must be edited and the following fields must be changed :

-- before any [server] section:
    1) autochecking: This allows to disable or enable auto mail checking.
       1 enables, 0 disables
    2) displaydelay: this will determine how long error messages show up
	before the screen is cleaned up.
    3) scrollspeed: this is a percentage of the original scrolling speed.
       Higher than 100, the text will scroll faster, lower than 100, the
       text will scroll more slowly.
    4) tempdir: directory to put temporary mails retrieved when using %c, %C or
       %m wildcards (default: /tmp).
    5) viewallmessages: This allows for alternating mail views upon startup,
       0 shows the From: and Subject: header fields of each mail, (message
       view mode)
       1 shows the total number of messages or the number of unread
       messages, per domain, and the number of selected messages (summary view
       mode).

-- for each [server] section (you can list up to 6 [server] sections):

    1) popserver:  this is the name of the pop3 server to contact.
    2) port:	   this is the port the pop3 server is on ( default 110).
    3) username:   user's pop3 login name.
    4) password:   user's pop3 login password.
    5) alias:	   3 alphanum characters server alias name, to
		   differentiate servers in the display window.
    6) mailcheckdelay: Number of minutes, before checking mail on this server.
                  (default = 10 minutes)
    7) countunreadonly: in the counter view, 0 displays the total number of
                   messages on the server, 1 displays only the number of unread
		   messages.
    8) mailclient: command to launch when clicking on the server alias name in
                   summary view mode.
		   The command, if it contains spaces or special characters
		   must be written between double quotes (`"').
		   See "template substitution" for more options.
    9) newmailcommand: command to launch when a new mail has arrived on the
	 	   server.
		   See "template substitution" for more options.
   10) selectedmesgcommand: command to launch on selected messages.
		   See "template substitution" for more options.
   11) mailseparator: specify a separator to include between each mail when
		   using %c or %C template substitutions.
   12) maxdlsize: in the case of the %c, %C and %m template substitutions, will
		   not download messages bigger than this value (-1: no limit).


3) Using WMPop3.

    1) If you have no mail, WMPop3LB will show "No mesg" and will count down
       the time before the next cheking.
       If none of the configured server can be contacted, WMPop3LB will
       show "ERROR" and will count down the time before the next checking.

    2) If you have mails, WMPop3LB will display a line for each mail, and will
       start scrolling the display, showing the server alias identifier, the
       "From:" and "Subject:" header fields in the following format:
	  "alias:<from field>/<subject field> * "

    * each time a new mail is received, wmpop3lb will try to launch the
      newmailcommand if it is specified in the configuration file.

    3) Depending on the option chosen for viewallmessages, it will display
       either:

	a) the alias, The From: and Subject: fields of each mail as
	   described above.
	b) The total number of messages or the number of unread messages
	   (depending on the configuration parameter "countunreadonly") on
	   the POP3 server (if the server has been contacted successfully)
	   as well as the number of messages selected.
	   Switching between number of unread messages and total number of
	   messages can be done by clicking on the right side of each server
	   line (':' means total number, '-' means total number of unread).
	   If the server cannot be contacted, it will show one of the
	   following error message:
		     - alias: C*ER  --> connection error
		     - alias: L*ER  --> login error (wrong login or passwd)
		     - alias: M*ER  --> can't get mails.

       * The far most right button is used to toggle both views.

    4) To delete one or more messages directly off one or more servers,
       select the messages you want to delete and then click on the bottom
       left "DEL" button.

       You can check how many messages are selected by switching view
       mode.

       A status per server will show up during "displaydelay" seconds with the
       following error codes:
		 - OK: messages were deleted successfully from the server
		 - NONE: no message was selected for this server
		 - D:nb: nb messages failed to be deleted.
		 -  Err: an error has occured (connection or else).

       WMPop3LB will not allow you to delete messages if the content of the
       mailbox on the server has changed since last checking.
       It will instead display an error message ("mailbox content has
       changed between updates del can.") and reload the content of the
       mailbox from the server.

    5) If a message is selected in the message view mode, the "reload" button
       will change to represent an "open" button.
       Clicking on this button will launch the command specified in the
       configuration file by the selectedmesgcommand parameter.

    6) to select all the messages, go to the summary view mode and click on
       "sel:" (left side of the last displayed line).
       to unselect all the messages, click on the right side of that line.

    7) To manually check for mail at any time, mouse click on the
       2nd button from the left, with a round arrow, if no message is selected.

    8) To turn off auto mail checking, mouse click on the "ch" button (second
       from the right).

    9) If you have more than 7 messages on all your servers you can scroll the
       window up and down using the up and down arrows or by using the
       scrollbar.


4) known problems / TODO

    1) wmpop3lb was built on the existing source code of wmpop3, written by
       Scott Holden (scotth@thezone.net).
       I didn't touch a lot the network functions, which are still using
       blocking sockets and connections.
       Because of that, if there is any network problem while waiting for some
       data, wmpop3lb will hang forever.
       The only solution, for the moment, is to restart wmpop3lb.

       Next version will use non-blocking sockets.