dockapps/wmclock/README

142 lines
6.1 KiB
Plaintext

# README: notes about wmclock
# created 1999-Apr-10 jmk
_______________________
|O| About wmclock |X|
^^^^^^^^^^^^^^^^^^^^^^^
Wmclock is an applet which displays the date and time in a dockable
tile in the same style as the clock from the NEXTSTEP(tm) operating
system. Wmclock is specially designed for the Window Maker window
manager, by Alfredo Kojima, and features multiple language support,
twenty-four-hour and twelve-hour (am/pm) time display, and, optionally,
can run a user-specified program on a mouse click. Wmclock is derived
from asclock, a similar clock for the AfterStep window manager.
____________________________
|O| Installing wmclock |X|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Please see the INSTALL file accompanying the wmclock source for
instructions on installing wmclock.
_________________________
|O| Getting Started |X|
^^^^^^^^^^^^^^^^^^^^^^^^^
Wmclock is designed especially for Window Maker; hence, putting wmclock
into your Window Maker dock is quick and easy. After you've installed
wmclock according to the instructions, there are three steps:
(1) Start wmclock. The easiest way to accomplish this is to accept
the defaults for things such as led color, blinking, etc, and
just start the clock:
wmclock
(2) Drag the resulting wmclock appicon to an empty slot in your dock.
You can do this in one of two fashions:
(a) Position the mouse pointer over a portion of the appicon tile
that is not covered by wmclock's LED display or calendar
display. Press the primary mouse button (usually the left
one) and drag to the dock. This requires a little bit of
precision in aiming the mouse, but requires no keyboard
action.
(b) Hold down the [Alt] or [Meta] key (whichever one you have
configured Window Maker to use), position the mouse pointer
over any part of the wmlock appicon, press the primary mouse
button (usually the left one), and drag to the dock. This
method requires less precision, but requires you to press and
hold a key while dragging.
(3) Set wmclock to launch when Window Maker starts. Press the menu
mouse button (usually the right one) on the portion of the docked
wmclock tile that is not covered by wmclock's LED display or
calendar display to bring up the dock icon menu, and choose
`Settings...'. In the resulting dialog, check the box labelled
`Start when Window Maker is started' and press `OK'. That's it!
_________________________
|O| Troubleshooting |X|
^^^^^^^^^^^^^^^^^^^^^^^^^
As with any dockable applet, there are a few possible `gotchas' with
wmclock and Window Maker:
- If you have the Clip set to `AutoAttract Icons', the wmclock
appicon will appear in the Clip instead of on the desktop. If your
Clip is collapsed, you won't be able to see the wmclock appicon,
even though it's running. Make sure you uncollapse your Clip and
look for wmclock there if it doesn't appear on your desktop.
- If your Clip is too close to your dock, you may have difficulty
docking wmclock, because the Clip may grab the wmclock appicon
instead. Try moving your Clip farther away from your dock before
docking wmclock.
_________________________________________________
|O| Differences Between asclock and wmclock |X|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Wmclock is derived from asclock version 1.0.12 by Beat Christen.
The major differences between asclock and wmclock are:
(1) Asclock is designed for use with the AfterStep window manager.
To use asclock with Window Maker, a patch is required. Wmclock
is better behaved with Window Maker and requires no patch or
special command-line options; it `just works'.
(2) Wmclock corrects a few of asclock's aesthetic defects. Most
notably, the `off-by-one-pixel' defect at the lefthand side of
the LED display is corrected.
(3) Asclock use a simple system() call to execute the command
specified using the `-exe' command-line option; this method could
create lots of unwanted zombie processes. Wmclock cleans up its
chiled processes every so often to eliminate the zombies.
Also, if no command was specified when asclock was started, it
would output a message warning that no command was specified each
time you click the mouse on asclock window area. Wmclock does not
output that message; if no command was specified, wmclock simply
does nothing when you click on it.
Other minor differences include:
(1) The `-shape' and `-iconic' command-line options are no longer
needed with wmclock. Wmclock recognizes them for backwards
compatibility with asclock, but they have no effect.
(2) Asclock contained an arbitrary limitation on the length of the
command (approximately 50 characters) that you could specify with
the `-exe' option. Wmclock removes that arbitrary limitation and
cleans up the code significantly in the process.
_______________________________________________________
|O| Authors, Copyright, License, Disclaimer, etc. |X|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Wmclock is Copyright (C) 1999 by Jim Knoble <jmknoble@pobox.com>.
Significant portions of wmclock are directly derived from asclock by
Beat Christen <spiff@longstreet.ch>, who, along with asclock's other
authors, owns the copyright to those portions of wmclock.
Wmclock is licensed under the GNU General Public License, version 2, or
(at your option) any later version. See <http://www.gnu.org/> for more
information.
The software is provided ``as is'', without warranty of any kind,
express or implied, including but not limited to the warranties of
merchantability, fitness for a particular purpose and noninfringement.
In no event shall the author(s) be liable for any claim, damages or
other liability, whether in an action of contract, tort or otherwise,
arising from, out of or in connection with the software or the use or
other dealings in the software.
Your mileage may vary. Eat your vegetables.
--
Bruce Cran <bruce@bluestop.org>