wmtv: Update and tidy up README.
This commit is contained in:
Doug Torrance
Carlos R. Mafra
parent
19e8a20f6e
commit
aec6b65e71
81
wmtv/README
81
wmtv/README
|
|
@ -1,32 +1,36 @@
|
|||
=========================================================
|
||||
================================================================================
|
||||
WMTV - WindowMaker TV
|
||||
<wliang@tartarus.uwa.edu.au>
|
||||
=========================================================
|
||||
|
||||
Version : 0.6.5
|
||||
Release Date : 25th April 1999
|
||||
|
||||
<wmaker-dev@lists.windowmaker.org>
|
||||
================================================================================
|
||||
|
||||
Description
|
||||
===========
|
||||
WMTV is a WindowMaker dock.app that controls TV Cards which are supported under the Linux Kernel 2.2.x series (mainly for cards based on BrookTree BT848/848a/849a/878/879 chipsets: There are lots of cards out there which uses these chipsets such as the Hauppauge WinTV, Aimslab VideoExtreme, miroVIDEO PCTV, AverMedia TVPhone, Spirit TV, MagicXPress TView, Teppro TEV, etc).
|
||||
WMTV is a WindowMaker dock.app that controls TV Cards which are supported under
|
||||
the Linux Kernel 2.2.x series (mainly for cards based on BrookTree BT848/848a/
|
||||
849a/878/879 chipsets: There are lots of cards out there which uses these
|
||||
chipsets such as the Hauppauge WinTV, Aimslab VideoExtreme, miroVIDEO PCTV,
|
||||
AverMedia TVPhone, Spirit TV, MagicXPress TView, Teppro TEV, etc).
|
||||
|
||||
|
||||
Installation
|
||||
============
|
||||
root/setuid root required to run this program.
|
||||
|
||||
2) su
|
||||
2) make install
|
||||
1) autoreconf -i
|
||||
2) ./configure
|
||||
3) make
|
||||
4) make install
|
||||
3) copy wmtvrc.sample to ~/.wmtvrc
|
||||
4) configure wmtv by editing ~/.wmtvrc or /etc/wmtvrc ( the former takes precedence)
|
||||
4) configure wmtv by editing ~/.wmtvrc or /etc/wmtvrc
|
||||
(the former takes precedence)
|
||||
|
||||
Note: Dock the application before switching the TV On.
|
||||
|
||||
|
||||
Features
|
||||
========
|
||||
WMTV is "Just another gadget(tm)". A miniature sized television screen which sits on your WindowMaker dock. However, it'll become a full featured television application in future major releases.
|
||||
WMTV is "Just another gadget(tm)". A miniature sized television screen which
|
||||
sits on your WindowMaker dock. However, it'll become a full featured television
|
||||
application in future major releases.
|
||||
|
||||
Currently supported:
|
||||
- Channel Presets
|
||||
|
|
@ -34,7 +38,8 @@ Currently supported:
|
|||
- FineTuning (Television source) - writes to config file now
|
||||
- Scanning of TV Stations (Television source)
|
||||
- External TV application support
|
||||
- All video sources (Television/S-Video/CompositeX) depending on your card
|
||||
- All video sources (Television/S-Video/CompositeX) depending on your
|
||||
card
|
||||
- 8/16/24/32 bit displays
|
||||
- Modification of config file after WMTV is executed
|
||||
(Turn Off and Turn On again to reinitialise config file)
|
||||
|
|
@ -49,20 +54,28 @@ Button map:
|
|||
|
||||
Tips:
|
||||
There are 3 modes of operation on this applications.
|
||||
You can cycle through the 3 modes by clicking on the right most button <3> repeatedly.
|
||||
You can cycle through the 3 modes by clicking on the right most button <3>
|
||||
repeatedly.
|
||||
The 3 modes are described below:
|
||||
|
||||
On mode
|
||||
---------
|
||||
Clicking on the rightmost button <3> for the first time (after the start of WMTV) would turn TV on. During this mode, the left <1> and right <2> buttons are used to change preset channels which has been defined in your config file. Left button to move down 1 channel and Right button to move up one
|
||||
channel.
|
||||
Clicking on the rightmost button <3> for the first time (after the star
|
||||
of WMTV) would turn TV on. During this mode, the left <1> and right <2>
|
||||
buttons are used to change preset channels which has been defined in
|
||||
your config file. Left button to move down 1 channel and Right button
|
||||
to move up one channel.
|
||||
|
||||
Tune mode
|
||||
---------
|
||||
Clicking again on button <3> after On mode would bring WMTV into tune mode. During this mode, the left <1> and right <2> buttons have two purposes
|
||||
individually. Left clicking on the left <1> or right <2> buttons would
|
||||
perform scans of channels. Scanning will stop when there is a strong signal strength. Right clicking on the left <1> or right <2> button would fine
|
||||
tune the current frequency. After tuning, clicking on button <3> would set the fine tuned offset into your config file and bring you back into "On mode".
|
||||
Clicking again on button <3> after On mode would bring WMTV into tune
|
||||
mode. During this mode, the left <1> and right <2> buttons have two
|
||||
purposes individually. Left clicking on the left <1> or right <2>
|
||||
buttons would perform scans of channels. Scanning will stop when there
|
||||
is a strong signal strength. Right clicking on the left <1> or right <2>
|
||||
button would fine tune the current frequency. After tuning, clicking on
|
||||
button <3> would set the fine tuned offset into your config file and
|
||||
bring you back into "On mode".
|
||||
|
||||
Off mode
|
||||
--------
|
||||
|
|
@ -71,9 +84,12 @@ The 3 modes are described below:
|
|||
|
||||
Right clicking once on the TV Screen would mute/unmute the audio.
|
||||
|
||||
Double clicking LEFT mouse button on the TV Screen would launch your favorite TV application when specified with --exe <filename> option in the command line.
|
||||
If the external application is not set, It'll automatically switch to the build in full screen mode.
|
||||
Double clicking the MIDDLE mouse button on the TV Screen would bring you into the built in full screen mode.
|
||||
Double clicking LEFT mouse button on the TV Screen would launch your favorite TV
|
||||
application when specified with --exe <filename> option in the command line.
|
||||
If the external application is not set, It'll automatically switch to the build
|
||||
in full screen mode.
|
||||
Double clicking the MIDDLE mouse button on the TV Screen would bring you into
|
||||
the built in full screen mode.
|
||||
|
||||
To launch an external application:
|
||||
|
||||
|
|
@ -126,7 +142,9 @@ Settings
|
|||
--------
|
||||
source = {Television|CompositeX|S-Video} (X is an integer)
|
||||
|
||||
freqnorm = {ntsc-bcast|ntsc-cable|ntsc-cable-hrc|ntsc-bcast-jp|ntsc-cable-jp|pal-europe|pal-europe-east|pal-italy|pal-newzealand|pal-australia|pal-ireland}
|
||||
freqnorm = {ntsc-bcast|ntsc-cable|ntsc-cable-hrc|ntsc-bcast-jp|ntsc-cable-jp|
|
||||
pal-europe|pal-europe-east|pal-italy|pal-newzealand|pal-australia|
|
||||
pal-ireland}
|
||||
|
||||
maxpreset = integer (maximum channel presets)
|
||||
|
||||
|
|
@ -145,11 +163,13 @@ separate it with a new line as in the sample config file above.
|
|||
E5|E6|E7|E8|E9|E10|E11|E12|
|
||||
R6|R7|R8|R9|R10|R11|R12|
|
||||
SE11|SE12|SE13|SE14|SE15|SE16|SE17|SE18|SE19|SE20|
|
||||
S21|S22|S23|S24|S25|S26|S27|S28|S29|S30|S31|S32|S33|S34|S35|S36|S37|S38|S39|S40|S41
|
||||
S21|S22|S23|S24|S25|S26|S27|S28|S29|S30|S31|S32|S33|S34|S35|S36|S37|S38|S39|
|
||||
S40|S41
|
||||
T7|T8|T9|T10|T11|T12|T13|T14|
|
||||
1 - 125
|
||||
}
|
||||
finetune parameters could be added spaced after the channel name above in a bracket.
|
||||
finetune parameters could be added spaced after the channel name above in a
|
||||
bracket.
|
||||
for example:
|
||||
32 (50) # channel 32 plus 50
|
||||
|
||||
|
|
@ -179,7 +199,8 @@ NOTE
|
|||
Please refer to COPYING for licensing info.
|
||||
This program might not work on your system and there is no way I will be held
|
||||
responsible for anything.
|
||||
This does to your system including loss of data, loss of uptime, loss of hair and etc.
|
||||
This does to your system including loss of data, loss of uptime, loss of hair
|
||||
and etc.
|
||||
|
||||
Please report any bugs/comments/feedbacks to <wliang@tartarus.uwa.edu.au>
|
||||
Please visit http://www.student.uwa.edu.au/~wliang for updates on WMTV.
|
||||
Please report any bugs/comments/feedbacks to <wmaker-dev@lists.windowmaker.org>
|
||||
Please visit http://windowmaker.org/dockapps/?name=wmtv for updates on WMTV.
|
||||
|
|
|
|||
Loading…
Reference in a new issue