# Makefile.in generated by automake 1.16.5 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ #*************************************************************************** # _ _ ____ _ # Project ___| | | | _ \| | # / __| | | | |_) | | # | (__| |_| | _ <| |___ # \___|\___/|_| \_\_____| # # Copyright (C) Daniel Stenberg, , et al. # # This software is licensed as described in the file COPYING, which # you should have received as part of this distribution. The terms # are also available at https://curl.se/docs/copyright.html. # # You may opt to use, copy, modify, merge, publish, distribute and/or sell # copies of the Software, and permit persons to whom the Software is # furnished to do so, under the terms of the COPYING file. # # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY # KIND, either express or implied. # # SPDX-License-Identifier: curl # ########################################################################### #*************************************************************************** # _ _ ____ _ # Project ___| | | | _ \| | # / __| | | | |_) | | # | (__| |_| | _ <| |___ # \___|\___/|_| \_\_____| # # Copyright (C) Daniel Stenberg, , et al. # # This software is licensed as described in the file COPYING, which # you should have received as part of this distribution. The terms # are also available at https://curl.se/docs/copyright.html. # # You may opt to use, copy, modify, merge, publish, distribute and/or sell # copies of the Software, and permit persons to whom the Software is # furnished to do so, under the terms of the COPYING file. # # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY # KIND, either express or implied. # # SPDX-License-Identifier: curl # ########################################################################### #*************************************************************************** # _ _ ____ _ # Project ___| | | | _ \| | # / __| | | | |_) | | # | (__| |_| | _ <| |___ # \___|\___/|_| \_\_____| # # Copyright (C) Daniel Stenberg, , et al. # # This software is licensed as described in the file COPYING, which # you should have received as part of this distribution. The terms # are also available at https://curl.se/docs/copyright.html. # # You may opt to use, copy, modify, merge, publish, distribute and/or sell # copies of the Software, and permit persons to whom the Software is # furnished to do so, under the terms of the COPYING file. # # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY # KIND, either express or implied. # # SPDX-License-Identifier: curl # ########################################################################### # ./src/Makefile.inc # Using the backslash as line continuation character might be problematic with # some make flavours. If we ever want to change this in a portable manner then # we should consider this idea : # CSRC1 = file1.c file2.c file3.c # CSRC2 = file4.c file5.c file6.c # CSOURCES = $(CSRC1) $(CSRC2) VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/curl-amissl.m4 \ $(top_srcdir)/m4/curl-bearssl.m4 \ $(top_srcdir)/m4/curl-compilers.m4 \ $(top_srcdir)/m4/curl-confopts.m4 \ $(top_srcdir)/m4/curl-functions.m4 \ $(top_srcdir)/m4/curl-gnutls.m4 \ $(top_srcdir)/m4/curl-mbedtls.m4 \ $(top_srcdir)/m4/curl-openssl.m4 \ $(top_srcdir)/m4/curl-override.m4 \ $(top_srcdir)/m4/curl-reentrant.m4 \ $(top_srcdir)/m4/curl-rustls.m4 \ $(top_srcdir)/m4/curl-schannel.m4 \ $(top_srcdir)/m4/curl-sectransp.m4 \ $(top_srcdir)/m4/curl-sysconfig.m4 \ $(top_srcdir)/m4/curl-wolfssl.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/xc-am-iface.m4 \ $(top_srcdir)/m4/xc-cc-check.m4 \ $(top_srcdir)/m4/xc-lt-iface.m4 \ $(top_srcdir)/m4/xc-translit.m4 \ $(top_srcdir)/m4/xc-val-flgs.m4 \ $(top_srcdir)/m4/zz40-xc-ovr.m4 \ $(top_srcdir)/m4/zz50-xc-ovr.m4 \ $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/lib/curl_config.h CONFIG_CLEAN_FILES = curl-config libcurl.pc CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" SCRIPTS = $(bin_SCRIPTS) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac DATA = $(pkgconfig_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir distdir-am dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/curl-config.in \ $(srcdir)/lib/Makefile.inc $(srcdir)/libcurl.pc.in \ $(srcdir)/src/Makefile.inc COPYING README compile config.guess \ config.sub depcomp install-sh ltmain.sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip # Exists only to be overridden by the user if desired. AM_DISTCHECK_DVI_TARGET = dvi distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APACHECTL = @APACHECTL@ APXS = @APXS@ AR = @AR@ AR_FLAGS = @AR_FLAGS@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@ CADDY = @CADDY@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@ CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@ CSCOPE = @CSCOPE@ CTAGS = @CTAGS@ CURLVERSION = @CURLVERSION@ CURL_CA_BUNDLE = @CURL_CA_BUNDLE@ CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@ CURL_DISABLE_DICT = @CURL_DISABLE_DICT@ CURL_DISABLE_FILE = @CURL_DISABLE_FILE@ CURL_DISABLE_FTP = @CURL_DISABLE_FTP@ CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@ CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@ CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@ CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@ CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@ CURL_DISABLE_MQTT = @CURL_DISABLE_MQTT@ CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@ CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@ CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@ CURL_DISABLE_SMB = @CURL_DISABLE_SMB@ CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@ CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@ CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@ CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@ CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@ CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@ CURL_PLIST_VERSION = @CURL_PLIST_VERSION@ CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@ CYGPATH_W = @CYGPATH_W@ DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_SHARED = @ENABLE_SHARED@ ENABLE_STATIC = @ENABLE_STATIC@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ FILECMD = @FILECMD@ FISH_FUNCTIONS_DIR = @FISH_FUNCTIONS_DIR@ GCOV = @GCOV@ GREP = @GREP@ HAVE_BROTLI = @HAVE_BROTLI@ HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@ HAVE_LDAP_SSL = @HAVE_LDAP_SSL@ HAVE_LIBZ = @HAVE_LIBZ@ HAVE_OPENSSL_QUIC = @HAVE_OPENSSL_QUIC@ HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@ HAVE_PROTO_BSDSOCKET_H = @HAVE_PROTO_BSDSOCKET_H@ HAVE_ZSTD = @HAVE_ZSTD@ HTTPD = @HTTPD@ HTTPD_NGHTTPX = @HTTPD_NGHTTPX@ IDN_ENABLED = @IDN_ENABLED@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ IPV6_ENABLED = @IPV6_ENABLED@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBCURL_LIBS = @LIBCURL_LIBS@ LIBCURL_NO_SHARED = @LIBCURL_NO_SHARED@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MANOPT = @MANOPT@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ NROFF = @NROFF@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKGADD_NAME = @PKGADD_NAME@ PKGADD_PKG = @PKGADD_PKG@ PKGADD_VENDOR = @PKGADD_VENDOR@ PKGCONFIG = @PKGCONFIG@ RANDOM_FILE = @RANDOM_FILE@ RANLIB = @RANLIB@ RC = @RC@ REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SSL_BACKENDS = @SSL_BACKENDS@ SSL_ENABLED = @SSL_ENABLED@ SSL_LIBS = @SSL_LIBS@ STRIP = @STRIP@ SUPPORT_FEATURES = @SUPPORT_FEATURES@ SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@ TEST_NGHTTPX = @TEST_NGHTTPX@ USE_ARES = @USE_ARES@ USE_BEARSSL = @USE_BEARSSL@ USE_GNUTLS = @USE_GNUTLS@ USE_HYPER = @USE_HYPER@ USE_LIBRTMP = @USE_LIBRTMP@ USE_LIBSSH = @USE_LIBSSH@ USE_LIBSSH2 = @USE_LIBSSH2@ USE_MBEDTLS = @USE_MBEDTLS@ USE_MSH3 = @USE_MSH3@ USE_NGHTTP2 = @USE_NGHTTP2@ USE_NGHTTP3 = @USE_NGHTTP3@ USE_NGTCP2 = @USE_NGTCP2@ USE_NGTCP2_CRYPTO_BORINGSSL = @USE_NGTCP2_CRYPTO_BORINGSSL@ USE_NGTCP2_CRYPTO_GNUTLS = @USE_NGTCP2_CRYPTO_GNUTLS@ USE_NGTCP2_CRYPTO_QUICTLS = @USE_NGTCP2_CRYPTO_QUICTLS@ USE_NGTCP2_CRYPTO_WOLFSSL = @USE_NGTCP2_CRYPTO_WOLFSSL@ USE_NGTCP2_H3 = @USE_NGTCP2_H3@ USE_OPENLDAP = @USE_OPENLDAP@ USE_OPENSSL_H3 = @USE_OPENSSL_H3@ USE_OPENSSL_QUIC = @USE_OPENSSL_QUIC@ USE_QUICHE = @USE_QUICHE@ USE_RUSTLS = @USE_RUSTLS@ USE_SCHANNEL = @USE_SCHANNEL@ USE_SECTRANSP = @USE_SECTRANSP@ USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@ USE_WIN32_CRYPTO = @USE_WIN32_CRYPTO@ USE_WIN32_LARGE_FILES = @USE_WIN32_LARGE_FILES@ USE_WIN32_SMALL_FILES = @USE_WIN32_SMALL_FILES@ USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@ USE_WOLFSSH = @USE_WOLFSSH@ USE_WOLFSSL = @USE_WOLFSSL@ VERSION = @VERSION@ VERSIONNUM = @VERSIONNUM@ ZLIB_LIBS = @ZLIB_LIBS@ ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ libext = @libext@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = foreign ACLOCAL_AMFLAGS = -I m4 CMAKE_DIST = \ CMake/cmake_uninstall.cmake.in \ CMake/CMakeConfigurableFile.in \ CMake/curl-config.cmake.in \ CMake/CurlSymbolHiding.cmake \ CMake/CurlTests.c \ CMake/FindBearSSL.cmake \ CMake/FindBrotli.cmake \ CMake/FindCARES.cmake \ CMake/FindGSS.cmake \ CMake/FindLibPSL.cmake \ CMake/FindLibSSH2.cmake \ CMake/FindMbedTLS.cmake \ CMake/FindMSH3.cmake \ CMake/FindNGHTTP2.cmake \ CMake/FindNGHTTP3.cmake \ CMake/FindNGTCP2.cmake \ CMake/FindQUICHE.cmake \ CMake/FindWolfSSL.cmake \ CMake/FindZstd.cmake \ CMake/Macros.cmake \ CMake/OtherTests.cmake \ CMake/PickyWarnings.cmake \ CMake/Platforms/WindowsCache.cmake \ CMake/Utilities.cmake \ CMakeLists.txt VC14_LIBTMPL = projects/Windows/VC14/lib/libcurl.tmpl VC14_LIBVCXPROJ = projects/Windows/VC14/lib/libcurl.vcxproj.dist VC14_LIBVCXPROJ_DEPS = $(VC14_LIBTMPL) Makefile.am lib/Makefile.inc VC14_SRCTMPL = projects/Windows/VC14/src/curl.tmpl VC14_SRCVCXPROJ = projects/Windows/VC14/src/curl.vcxproj.dist VC14_SRCVCXPROJ_DEPS = $(VC14_SRCTMPL) Makefile.am src/Makefile.inc VC14_10_LIBTMPL = projects/Windows/VC14.10/lib/libcurl.tmpl VC14_10_LIBVCXPROJ = projects/Windows/VC14.10/lib/libcurl.vcxproj.dist VC14_10_LIBVCXPROJ_DEPS = $(VC14_10_LIBTMPL) Makefile.am lib/Makefile.inc VC14_10_SRCTMPL = projects/Windows/VC14.10/src/curl.tmpl VC14_10_SRCVCXPROJ = projects/Windows/VC14.10/src/curl.vcxproj.dist VC14_10_SRCVCXPROJ_DEPS = $(VC14_10_SRCTMPL) Makefile.am src/Makefile.inc VC14_20_LIBTMPL = projects/Windows/VC14.20/lib/libcurl.tmpl VC14_20_LIBVCXPROJ = projects/Windows/VC14.20/lib/libcurl.vcxproj.dist VC14_20_LIBVCXPROJ_DEPS = $(VC14_20_LIBTMPL) Makefile.am lib/Makefile.inc VC14_20_SRCTMPL = projects/Windows/VC14.20/src/curl.tmpl VC14_20_SRCVCXPROJ = projects/Windows/VC14.20/src/curl.vcxproj.dist VC14_20_SRCVCXPROJ_DEPS = $(VC14_20_SRCTMPL) Makefile.am src/Makefile.inc VC14_30_LIBTMPL = projects/Windows/VC14.30/lib/libcurl.tmpl VC14_30_LIBVCXPROJ = projects/Windows/VC14.30/lib/libcurl.vcxproj.dist VC14_30_LIBVCXPROJ_DEPS = $(VC14_30_LIBTMPL) Makefile.am lib/Makefile.inc VC14_30_SRCTMPL = projects/Windows/VC14.30/src/curl.tmpl VC14_30_SRCVCXPROJ = projects/Windows/VC14.30/src/curl.vcxproj.dist VC14_30_SRCVCXPROJ_DEPS = $(VC14_30_SRCTMPL) Makefile.am src/Makefile.inc VC_DIST = projects/README.md \ projects/build-openssl.bat \ projects/build-wolfssl.bat \ projects/checksrc.bat \ projects/Windows/VC14/curl-all.sln \ projects/Windows/VC14/lib/libcurl.sln \ projects/Windows/VC14/lib/libcurl.vcxproj.filters \ projects/Windows/VC14/src/curl.sln \ projects/Windows/VC14/src/curl.vcxproj.filters \ projects/Windows/VC14.10/curl-all.sln \ projects/Windows/VC14.10/lib/libcurl.sln \ projects/Windows/VC14.10/lib/libcurl.vcxproj.filters \ projects/Windows/VC14.10/src/curl.sln \ projects/Windows/VC14.10/src/curl.vcxproj.filters \ projects/Windows/VC14.20/curl-all.sln \ projects/Windows/VC14.20/lib/libcurl.sln \ projects/Windows/VC14.20/lib/libcurl.vcxproj.filters \ projects/Windows/VC14.20/src/curl.sln \ projects/Windows/VC14.20/src/curl.vcxproj.filters \ projects/Windows/VC14.30/curl-all.sln \ projects/Windows/VC14.30/lib/libcurl.sln \ projects/Windows/VC14.30/lib/libcurl.vcxproj.filters \ projects/Windows/VC14.30/src/curl.sln \ projects/Windows/VC14.30/src/curl.vcxproj.filters \ projects/generate.bat \ projects/wolfssl_options.h \ projects/wolfssl_override.props WINBUILD_DIST = winbuild/README.md winbuild/gen_resp_file.bat \ winbuild/MakefileBuild.vc winbuild/Makefile.vc PLAN9_DIST = plan9/include/mkfile \ plan9/include/mkfile \ plan9/mkfile.proto \ plan9/mkfile \ plan9/README \ plan9/lib/mkfile.inc \ plan9/lib/mkfile \ plan9/src/mkfile.inc \ plan9/src/mkfile EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in \ RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework $(CMAKE_DIST) \ $(VC_DIST) $(WINBUILD_DIST) $(PLAN9_DIST) lib/libcurl.vers.in buildconf.bat \ libcurl.def CLEANFILES = $(VC14_LIBVCXPROJ) $(VC14_SRCVCXPROJ) \ $(VC14_10_LIBVCXPROJ) $(VC14_10_SRCVCXPROJ) \ $(VC14_20_LIBVCXPROJ) $(VC14_20_SRCVCXPROJ) \ $(VC14_30_LIBVCXPROJ) $(VC14_30_SRCVCXPROJ) bin_SCRIPTS = curl-config SUBDIRS = lib src DIST_SUBDIRS = $(SUBDIRS) tests packages scripts include docs pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = libcurl.pc LIB_VAUTH_CFILES = \ vauth/cleartext.c \ vauth/cram.c \ vauth/digest.c \ vauth/digest_sspi.c \ vauth/gsasl.c \ vauth/krb5_gssapi.c \ vauth/krb5_sspi.c \ vauth/ntlm.c \ vauth/ntlm_sspi.c \ vauth/oauth2.c \ vauth/spnego_gssapi.c \ vauth/spnego_sspi.c \ vauth/vauth.c LIB_VAUTH_HFILES = \ vauth/digest.h \ vauth/ntlm.h \ vauth/vauth.h LIB_VTLS_CFILES = \ vtls/bearssl.c \ vtls/gtls.c \ vtls/hostcheck.c \ vtls/keylog.c \ vtls/mbedtls.c \ vtls/mbedtls_threadlock.c \ vtls/openssl.c \ vtls/rustls.c \ vtls/schannel.c \ vtls/schannel_verify.c \ vtls/sectransp.c \ vtls/vtls.c \ vtls/wolfssl.c \ vtls/x509asn1.c LIB_VTLS_HFILES = \ vtls/bearssl.h \ vtls/gtls.h \ vtls/hostcheck.h \ vtls/keylog.h \ vtls/mbedtls.h \ vtls/mbedtls_threadlock.h \ vtls/openssl.h \ vtls/rustls.h \ vtls/schannel.h \ vtls/schannel_int.h \ vtls/sectransp.h \ vtls/vtls.h \ vtls/vtls_int.h \ vtls/wolfssl.h \ vtls/x509asn1.h LIB_VQUIC_CFILES = \ vquic/curl_msh3.c \ vquic/curl_ngtcp2.c \ vquic/curl_osslq.c \ vquic/curl_quiche.c \ vquic/vquic.c \ vquic/vquic-tls.c LIB_VQUIC_HFILES = \ vquic/curl_msh3.h \ vquic/curl_ngtcp2.h \ vquic/curl_osslq.h \ vquic/curl_quiche.h \ vquic/vquic.h \ vquic/vquic_int.h \ vquic/vquic-tls.h LIB_VSSH_CFILES = \ vssh/libssh.c \ vssh/libssh2.c \ vssh/wolfssh.c LIB_VSSH_HFILES = \ vssh/ssh.h LIB_CFILES = \ altsvc.c \ amigaos.c \ asyn-ares.c \ asyn-thread.c \ base64.c \ bufq.c \ bufref.c \ c-hyper.c \ cf-h1-proxy.c \ cf-h2-proxy.c \ cf-haproxy.c \ cf-https-connect.c \ cf-socket.c \ cfilters.c \ conncache.c \ connect.c \ content_encoding.c \ cookie.c \ curl_addrinfo.c \ curl_des.c \ curl_endian.c \ curl_fnmatch.c \ curl_get_line.c \ curl_gethostname.c \ curl_gssapi.c \ curl_memrchr.c \ curl_multibyte.c \ curl_ntlm_core.c \ curl_ntlm_wb.c \ curl_path.c \ curl_range.c \ curl_rtmp.c \ curl_sasl.c \ curl_sspi.c \ curl_threads.c \ curl_trc.c \ dict.c \ doh.c \ dynbuf.c \ dynhds.c \ easy.c \ easygetopt.c \ easyoptions.c \ escape.c \ file.c \ fileinfo.c \ fopen.c \ formdata.c \ ftp.c \ ftplistparser.c \ getenv.c \ getinfo.c \ gopher.c \ hash.c \ headers.c \ hmac.c \ hostasyn.c \ hostip.c \ hostip4.c \ hostip6.c \ hostsyn.c \ hsts.c \ http.c \ http1.c \ http2.c \ http_aws_sigv4.c \ http_chunks.c \ http_digest.c \ http_negotiate.c \ http_ntlm.c \ http_proxy.c \ idn.c \ if2ip.c \ imap.c \ inet_ntop.c \ inet_pton.c \ krb5.c \ ldap.c \ llist.c \ macos.c \ md4.c \ md5.c \ memdebug.c \ mime.c \ mprintf.c \ mqtt.c \ multi.c \ netrc.c \ nonblock.c \ noproxy.c \ openldap.c \ parsedate.c \ pingpong.c \ pop3.c \ progress.c \ psl.c \ rand.c \ rename.c \ rtsp.c \ select.c \ sendf.c \ setopt.c \ sha256.c \ share.c \ slist.c \ smb.c \ smtp.c \ socketpair.c \ socks.c \ socks_gssapi.c \ socks_sspi.c \ speedcheck.c \ splay.c \ strcase.c \ strdup.c \ strerror.c \ strtok.c \ strtoofft.c \ system_win32.c \ telnet.c \ tftp.c \ timediff.c \ timeval.c \ transfer.c \ url.c \ urlapi.c \ version.c \ version_win32.c \ warnless.c \ ws.c LIB_HFILES = \ altsvc.h \ amigaos.h \ arpa_telnet.h \ asyn.h \ bufq.h \ bufref.h \ c-hyper.h \ cf-h1-proxy.h \ cf-h2-proxy.h \ cf-haproxy.h \ cf-https-connect.h \ cf-socket.h \ cfilters.h \ conncache.h \ connect.h \ content_encoding.h \ cookie.h \ curl_addrinfo.h \ curl_base64.h \ curl_ctype.h \ curl_des.h \ curl_endian.h \ curl_fnmatch.h \ curl_get_line.h \ curl_gethostname.h \ curl_gssapi.h \ curl_hmac.h \ curl_krb5.h \ curl_ldap.h \ curl_md4.h \ curl_md5.h \ curl_memory.h \ curl_memrchr.h \ curl_multibyte.h \ curl_ntlm_core.h \ curl_ntlm_wb.h \ curl_path.h \ curl_printf.h \ curl_range.h \ curl_rtmp.h \ curl_sasl.h \ curl_setup.h \ curl_setup_once.h \ curl_sha256.h \ curl_sspi.h \ curl_threads.h \ curl_trc.h \ curlx.h \ dict.h \ doh.h \ dynbuf.h \ dynhds.h \ easy_lock.h \ easyif.h \ easyoptions.h \ escape.h \ file.h \ fileinfo.h \ fopen.h \ formdata.h \ ftp.h \ ftplistparser.h \ functypes.h \ getinfo.h \ gopher.h \ hash.h \ headers.h \ hostip.h \ hsts.h \ http.h \ http1.h \ http2.h \ http_aws_sigv4.h \ http_chunks.h \ http_digest.h \ http_negotiate.h \ http_ntlm.h \ http_proxy.h \ idn.h \ if2ip.h \ imap.h \ inet_ntop.h \ inet_pton.h \ llist.h \ macos.h \ memdebug.h \ mime.h \ mqtt.h \ multihandle.h \ multiif.h \ netrc.h \ nonblock.h \ noproxy.h \ parsedate.h \ pingpong.h \ pop3.h \ progress.h \ psl.h \ rand.h \ rename.h \ rtsp.h \ select.h \ sendf.h \ setopt.h \ setup-vms.h \ share.h \ sigpipe.h \ slist.h \ smb.h \ smtp.h \ sockaddr.h \ socketpair.h \ socks.h \ speedcheck.h \ splay.h \ strcase.h \ strdup.h \ strerror.h \ strtok.h \ strtoofft.h \ system_win32.h \ telnet.h \ tftp.h \ timediff.h \ timeval.h \ transfer.h \ url.h \ urlapi-int.h \ urldata.h \ version_win32.h \ warnless.h \ ws.h LIB_RCFILES = libcurl.rc CSOURCES = $(LIB_CFILES) $(LIB_VAUTH_CFILES) $(LIB_VTLS_CFILES) \ $(LIB_VQUIC_CFILES) $(LIB_VSSH_CFILES) HHEADERS = $(LIB_HFILES) $(LIB_VAUTH_HFILES) $(LIB_VTLS_HFILES) \ $(LIB_VQUIC_HFILES) $(LIB_VSSH_HFILES) # libcurl sources to include in curltool lib we use for test binaries CURLTOOL_LIBCURL_CFILES = \ ../lib/base64.c \ ../lib/dynbuf.c # libcurl has sources that provide functions named curlx_* that aren't part of # the official API, but we reuse the code here to avoid duplication. CURLX_CFILES = \ ../lib/base64.c \ ../lib/curl_multibyte.c \ ../lib/dynbuf.c \ ../lib/nonblock.c \ ../lib/strtoofft.c \ ../lib/timediff.c \ ../lib/version_win32.c \ ../lib/warnless.c CURLX_HFILES = \ ../lib/curl_ctype.h \ ../lib/curl_multibyte.h \ ../lib/curl_setup.h \ ../lib/dynbuf.h \ ../lib/nonblock.h \ ../lib/strtoofft.h \ ../lib/timediff.h \ ../lib/version_win32.h \ ../lib/warnless.h CURL_CFILES = \ slist_wc.c \ tool_binmode.c \ tool_bname.c \ tool_cb_dbg.c \ tool_cb_hdr.c \ tool_cb_prg.c \ tool_cb_rea.c \ tool_cb_see.c \ tool_cb_wrt.c \ tool_cfgable.c \ tool_dirhie.c \ tool_doswin.c \ tool_easysrc.c \ tool_filetime.c \ tool_findfile.c \ tool_formparse.c \ tool_getparam.c \ tool_getpass.c \ tool_help.c \ tool_helpers.c \ tool_hugehelp.c \ tool_ipfs.c \ tool_libinfo.c \ tool_listhelp.c \ tool_main.c \ tool_msgs.c \ tool_operate.c \ tool_operhlp.c \ tool_paramhlp.c \ tool_parsecfg.c \ tool_progress.c \ tool_setopt.c \ tool_sleep.c \ tool_stderr.c \ tool_strdup.c \ tool_urlglob.c \ tool_util.c \ tool_vms.c \ tool_writeout.c \ tool_writeout_json.c \ tool_xattr.c \ var.c CURL_HFILES = \ slist_wc.h \ tool_binmode.h \ tool_bname.h \ tool_cb_dbg.h \ tool_cb_hdr.h \ tool_cb_prg.h \ tool_cb_rea.h \ tool_cb_see.h \ tool_cb_wrt.h \ tool_cfgable.h \ tool_dirhie.h \ tool_doswin.h \ tool_easysrc.h \ tool_filetime.h \ tool_findfile.h \ tool_formparse.h \ tool_getparam.h \ tool_getpass.h \ tool_help.h \ tool_helpers.h \ tool_hugehelp.h \ tool_ipfs.h \ tool_libinfo.h \ tool_main.h \ tool_msgs.h \ tool_operate.h \ tool_operhlp.h \ tool_paramhlp.h \ tool_parsecfg.h \ tool_progress.h \ tool_sdecls.h \ tool_setopt.h \ tool_setup.h \ tool_sleep.h \ tool_stderr.h \ tool_strdup.h \ tool_urlglob.h \ tool_util.h \ tool_version.h \ tool_vms.h \ tool_writeout.h \ tool_writeout_json.h \ tool_xattr.h \ var.h CURL_RCFILES = curl.rc # curl_SOURCES is special and gets assigned in src/Makefile.am CURL_FILES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES) all: all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in cd $(top_builddir) && $(SHELL) ./config.status $@ libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-binSCRIPTS: $(bin_SCRIPTS) @$(NORMAL_INSTALL) @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-zstd: distdir tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ *.tar.zst*) \ zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(SCRIPTS) $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-pkgconfigDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-binSCRIPTS install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) uninstall-hook .MAKE: $(am__recursive_targets) install-am install-data-am \ install-strip uninstall-am .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ distclean-generic distclean-libtool distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-binSCRIPTS \ install-data install-data-am install-data-hook install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-pkgconfigDATA install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-binSCRIPTS uninstall-hook \ uninstall-pkgconfigDATA .PRECIOUS: Makefile # List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files dist-hook: rm -rf $(top_builddir)/tests/log find $(distdir) -name "*.dist" -exec rm {} \; (distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \ for file in $$distit; do \ strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \ cp -p $$file $(distdir)$$strip; \ done) check: test examples check-docs @CROSSCOMPILING_TRUE@test-full: test @CROSSCOMPILING_TRUE@test-torture: test @CROSSCOMPILING_TRUE@test: @CROSSCOMPILING_TRUE@ @echo "NOTICE: we can't run the tests when cross-compiling!" @CROSSCOMPILING_FALSE@test: @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all quiet-test) @CROSSCOMPILING_FALSE@test-full: @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all full-test) @CROSSCOMPILING_FALSE@test-nonflaky: @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all nonflaky-test) @CROSSCOMPILING_FALSE@test-torture: @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all torture-test) @CROSSCOMPILING_FALSE@test-event: @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all event-test) @CROSSCOMPILING_FALSE@test-am: @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all am-test) @CROSSCOMPILING_FALSE@test-ci: @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all ci-test) examples: @(cd docs/examples; $(MAKE) check) check-docs: @(cd docs/libcurl; $(MAKE) check) # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros # must contain the following line: # %_topdir /home/loic/local/rpm # and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc. # # cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS # # If additional configure flags are needed to build the package, add the # following in ~/.rpmmacros # %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS} # and run make rpm in the following way: # AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm # rpms: $(MAKE) RPMDIST=curl rpm $(MAKE) RPMDIST=curl-ssl rpm rpm: RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \ cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \ cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \ rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \ mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \ mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm . # # Build a Solaris pkgadd format file # run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format # file (which ends up back in this directory). # The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do # pkgadd -d ./HAXXcurl-* # # gak - libtool requires an absolute directory, hence the pwd below... pkgadd: umask 022 ; \ $(MAKE) install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \ cat COPYING > $(srcdir)/packages/Solaris/copyright ; \ cd $(srcdir)/packages/Solaris && $(MAKE) package # # Build a cygwin binary tarball installation file # resulting .tar.bz2 file will end up at packages/Win32/cygwin cygwinbin: $(MAKE) -C packages/Win32/cygwin cygwinbin # We extend the standard install with a custom hook: install-data-hook: (cd include && $(MAKE) install) (cd docs && $(MAKE) install) (cd docs/libcurl && $(MAKE) install) # We extend the standard uninstall with a custom hook: uninstall-hook: (cd include && $(MAKE) uninstall) (cd docs && $(MAKE) uninstall) (cd docs/libcurl && $(MAKE) uninstall) ca-bundle: $(srcdir)/scripts/mk-ca-bundle.pl @echo "generating a fresh ca-bundle.crt" @perl $(srcdir)/scripts/mk-ca-bundle.pl -b -l -u lib/ca-bundle.crt ca-firefox: $(srcdir)/scripts/firefox-db2pem.sh @echo "generating a fresh ca-bundle.crt" $(srcdir)/scripts/firefox-db2pem.sh lib/ca-bundle.crt checksrc: (cd lib && $(MAKE) checksrc) (cd src && $(MAKE) checksrc) (cd tests && $(MAKE) checksrc) (cd include/curl && $(MAKE) checksrc) (cd docs/examples && $(MAKE) checksrc) (cd packages && $(MAKE) checksrc) .PHONY: vc-ide vc-ide: $(VC14_LIBVCXPROJ_DEPS) $(VC14_SRCVCXPROJ_DEPS) \ $(VC14_10_LIBVCXPROJ_DEPS) $(VC14_10_SRCVCXPROJ_DEPS) \ $(VC14_20_LIBVCXPROJ_DEPS) $(VC14_20_SRCVCXPROJ_DEPS) \ $(VC14_30_LIBVCXPROJ_DEPS) $(VC14_30_SRCVCXPROJ_DEPS) @(win32_lib_srcs='$(LIB_CFILES)'; \ win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \ win32_lib_rc='$(LIB_RCFILES)'; \ win32_lib_vauth_srcs='$(LIB_VAUTH_CFILES)'; \ win32_lib_vauth_hdrs='$(LIB_VAUTH_HFILES)'; \ win32_lib_vquic_srcs='$(LIB_VQUIC_CFILES)'; \ win32_lib_vquic_hdrs='$(LIB_VQUIC_HFILES)'; \ win32_lib_vssh_srcs='$(LIB_VSSH_CFILES)'; \ win32_lib_vssh_hdrs='$(LIB_VSSH_HFILES)'; \ win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \ win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \ win32_src_srcs='$(CURL_CFILES)'; \ win32_src_hdrs='$(CURL_HFILES)'; \ win32_src_rc='$(CURL_RCFILES)'; \ win32_src_x_srcs='$(CURLX_CFILES)'; \ win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \ \ sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \ sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \ sorted_lib_vauth_srcs=`for file in $$win32_lib_vauth_srcs; do echo $$file; done | sort`; \ sorted_lib_vauth_hdrs=`for file in $$win32_lib_vauth_hdrs; do echo $$file; done | sort`; \ sorted_lib_vquic_srcs=`for file in $$win32_lib_vquic_srcs; do echo $$file; done | sort`; \ sorted_lib_vquic_hdrs=`for file in $$win32_lib_vquic_hdrs; do echo $$file; done | sort`; \ sorted_lib_vssh_srcs=`for file in $$win32_lib_vssh_srcs; do echo $$file; done | sort`; \ sorted_lib_vssh_hdrs=`for file in $$win32_lib_vssh_hdrs; do echo $$file; done | sort`; \ sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \ sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \ sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \ sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \ sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \ sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \ \ awk_code='\ function gen_element(type, dir, file)\ {\ sub(/vauth\//, "", file);\ sub(/vquic\//, "", file);\ sub(/vssh\//, "", file);\ sub(/vtls\//, "", file);\ \ spaces=" ";\ if(dir == "lib\\vauth" ||\ dir == "lib\\vquic" ||\ dir == "lib\\vssh" ||\ dir == "lib\\vtls")\ tabs=" ";\ else\ tabs=" ";\ \ if(type == "dsp") {\ printf("# Begin Source File\r\n");\ printf("\r\n");\ printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\ printf("# End Source File\r\n");\ }\ else if(type == "vcproj1") {\ printf("%s\r\n",\ tabs, dir, file);\ printf("%s\r\n", tabs);\ }\ else if(type == "vcproj2") {\ printf("%s\r\n", tabs);\ printf("%s\r\n", tabs);\ }\ else if(type == "vcxproj") {\ i = index(file, ".");\ ext = substr(file, i == 0 ? 0 : i + 1);\ \ if(ext == "c")\ printf("%s\r\n",\ spaces, dir, file);\ else if(ext == "h")\ printf("%s\r\n",\ spaces, dir, file);\ else if(ext == "rc")\ printf("%s\r\n",\ spaces, dir, file);\ }\ }\ \ {\ \ if($$0 == "CURL_LIB_C_FILES") {\ split(lib_srcs, arr);\ for(val in arr) gen_element(proj_type, "lib", arr[val]);\ }\ else if($$0 == "CURL_LIB_H_FILES") {\ split(lib_hdrs, arr);\ for(val in arr) gen_element(proj_type, "lib", arr[val]);\ }\ else if($$0 == "CURL_LIB_RC_FILES") {\ split(lib_rc, arr);\ for(val in arr) gen_element(proj_type, "lib", arr[val]);\ }\ else if($$0 == "CURL_LIB_VAUTH_C_FILES") {\ split(lib_vauth_srcs, arr);\ for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\ }\ else if($$0 == "CURL_LIB_VAUTH_H_FILES") {\ split(lib_vauth_hdrs, arr);\ for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\ }\ else if($$0 == "CURL_LIB_VQUIC_C_FILES") {\ split(lib_vquic_srcs, arr);\ for(val in arr) gen_element(proj_type, "lib\\vquic", arr[val]);\ }\ else if($$0 == "CURL_LIB_VQUIC_H_FILES") {\ split(lib_vquic_hdrs, arr);\ for(val in arr) gen_element(proj_type, "lib\\vquic", arr[val]);\ }\ else if($$0 == "CURL_LIB_VSSH_C_FILES") {\ split(lib_vssh_srcs, arr);\ for(val in arr) gen_element(proj_type, "lib\\vssh", arr[val]);\ }\ else if($$0 == "CURL_LIB_VSSH_H_FILES") {\ split(lib_vssh_hdrs, arr);\ for(val in arr) gen_element(proj_type, "lib\\vssh", arr[val]);\ }\ else if($$0 == "CURL_LIB_VTLS_C_FILES") {\ split(lib_vtls_srcs, arr);\ for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\ }\ else if($$0 == "CURL_LIB_VTLS_H_FILES") {\ split(lib_vtls_hdrs, arr);\ for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\ }\ else if($$0 == "CURL_SRC_C_FILES") {\ split(src_srcs, arr);\ for(val in arr) gen_element(proj_type, "src", arr[val]);\ }\ else if($$0 == "CURL_SRC_H_FILES") {\ split(src_hdrs, arr);\ for(val in arr) gen_element(proj_type, "src", arr[val]);\ }\ else if($$0 == "CURL_SRC_RC_FILES") {\ split(src_rc, arr);\ for(val in arr) gen_element(proj_type, "src", arr[val]);\ }\ else if($$0 == "CURL_SRC_X_C_FILES") {\ split(src_x_srcs, arr);\ for(val in arr) {\ sub(/..\/lib\//, "", arr[val]);\ gen_element(proj_type, "lib", arr[val]);\ }\ }\ else if($$0 == "CURL_SRC_X_H_FILES") {\ split(src_x_hdrs, arr);\ for(val in arr) {\ sub(/..\/lib\//, "", arr[val]);\ gen_element(proj_type, "lib", arr[val]);\ }\ }\ else\ printf("%s\r\n", $$0);\ }';\ \ echo "generating '$(VC14_LIBVCXPROJ)'"; \ awk -v proj_type=vcxproj \ -v lib_srcs="$$sorted_lib_srcs" \ -v lib_hdrs="$$sorted_lib_hdrs" \ -v lib_rc="$$win32_lib_rc" \ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ "$$awk_code" $(srcdir)/$(VC14_LIBTMPL) > $(VC14_LIBVCXPROJ) || { exit 1; }; \ \ echo "generating '$(VC14_SRCVCXPROJ)'"; \ awk -v proj_type=vcxproj \ -v src_srcs="$$sorted_src_srcs" \ -v src_hdrs="$$sorted_src_hdrs" \ -v src_rc="$$win32_src_rc" \ -v src_x_srcs="$$sorted_src_x_srcs" \ -v src_x_hdrs="$$sorted_src_x_hdrs" \ "$$awk_code" $(srcdir)/$(VC14_SRCTMPL) > $(VC14_SRCVCXPROJ) || { exit 1; }; \ \ echo "generating '$(VC14_10_LIBVCXPROJ)'"; \ awk -v proj_type=vcxproj \ -v lib_srcs="$$sorted_lib_srcs" \ -v lib_hdrs="$$sorted_lib_hdrs" \ -v lib_rc="$$win32_lib_rc" \ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ "$$awk_code" $(srcdir)/$(VC14_10_LIBTMPL) > $(VC14_10_LIBVCXPROJ) || { exit 1; }; \ \ echo "generating '$(VC14_10_SRCVCXPROJ)'"; \ awk -v proj_type=vcxproj \ -v src_srcs="$$sorted_src_srcs" \ -v src_hdrs="$$sorted_src_hdrs" \ -v src_rc="$$win32_src_rc" \ -v src_x_srcs="$$sorted_src_x_srcs" \ -v src_x_hdrs="$$sorted_src_x_hdrs" \ "$$awk_code" $(srcdir)/$(VC14_10_SRCTMPL) > $(VC14_10_SRCVCXPROJ) || { exit 1; }; \ \ echo "generating '$(VC14_20_LIBVCXPROJ)'"; \ awk -v proj_type=vcxproj \ -v lib_srcs="$$sorted_lib_srcs" \ -v lib_hdrs="$$sorted_lib_hdrs" \ -v lib_rc="$$win32_lib_rc" \ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ "$$awk_code" $(srcdir)/$(VC14_20_LIBTMPL) > $(VC14_20_LIBVCXPROJ) || { exit 1; }; \ \ echo "generating '$(VC14_20_SRCVCXPROJ)'"; \ awk -v proj_type=vcxproj \ -v src_srcs="$$sorted_src_srcs" \ -v src_hdrs="$$sorted_src_hdrs" \ -v src_rc="$$win32_src_rc" \ -v src_x_srcs="$$sorted_src_x_srcs" \ -v src_x_hdrs="$$sorted_src_x_hdrs" \ "$$awk_code" $(srcdir)/$(VC14_20_SRCTMPL) > $(VC14_20_SRCVCXPROJ) || { exit 1; }; \ \ echo "generating '$(VC14_30_LIBVCXPROJ)'"; \ awk -v proj_type=vcxproj \ -v lib_srcs="$$sorted_lib_srcs" \ -v lib_hdrs="$$sorted_lib_hdrs" \ -v lib_rc="$$win32_lib_rc" \ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ "$$awk_code" $(srcdir)/$(VC14_30_LIBTMPL) > $(VC14_30_LIBVCXPROJ) || { exit 1; }; \ \ echo "generating '$(VC14_30_SRCVCXPROJ)'"; \ awk -v proj_type=vcxproj \ -v src_srcs="$$sorted_src_srcs" \ -v src_hdrs="$$sorted_src_hdrs" \ -v src_rc="$$win32_src_rc" \ -v src_x_srcs="$$sorted_src_x_srcs" \ -v src_x_hdrs="$$sorted_src_x_hdrs" \ "$$awk_code" $(srcdir)/$(VC14_30_SRCTMPL) > $(VC14_30_SRCVCXPROJ) || { exit 1; };) tidy: (cd src && $(MAKE) tidy) (cd lib && $(MAKE) tidy) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: